end distance

end distance

The distance between the end of a timber which is bolted and the center of the nearest bolt hole.
Mentioned in ?
References in periodicals archive ?
The results showed that all variations of end distance failed in ductile manner especially the connections with end distances of 5d and 7d.
Addressing an open court organized at Canal Rest House Jalalpur Peerwala here on Wednesday, the RPO said that open courts were being organized to end distance between police and public.
Wcb,Plug Of Astm A 35 1Cf 8M With Flanged Ends,End To End Distance
If the Flory radius (end to end distance of polymer molecule), Rf, calculated by Flory Huggins theory, is shorter than the distance s between grafting sites, a mushroom like structure is obtained when distance becomes shorter than Rf, the chains are forced to stretch into a brush like configuration (Fig.
Eckelman, The end distance effect of knockdown furniture fasteners on bending moment resistance of corner joints, Acta univ.
x=difference of latitude1 and latitude2 y=difference of longtitude1 and longtitude2 a=centreangle (x,y,latitude1,latitude2) c=greatercircledistance(a) d=R*c //R is Redius of earth return d End Distance.
These results again tend to indicate that end distance did not affect variability of withdrawal capacity.
The figure 6 describes the energy consumption of the sensor node with respect to the end to end distance.
Tenders are invited for Hex Head Bolt Size M22x130 With Nut, Split Pin And Washer, 05 Mm Hole From Free End Distance 10Mm Make-Lps/Unbrako.
Structural properties of pegged timber connections as affected by end distance.
All of the yellow-poplar (Yp) and southern yellow pine (SYP) specimens had a cross-pipe to member end distance of 5 inches except for one set of SYP specimens.
This study investigates the influence of end distance on the mechanical behavior of wood-dowel or 'pegged' joints, commonly used in traditional mortise-and-tenon joinery.