end mill


Also found in: Wikipedia.

end mill

[′end ‚mil]
(mechanical engineering)
A machine which has a rotating shank with cutting teeth at the end and spiral blades on the peripheral surface; used for shaping and cutting metal.
References in periodicals archive ?
TMX CAT's are designed to outperform all other end mill systems in the most crucial areas of tool holder performance: concentricity, rigidity and balance at high spindle speeds.
Major cutting conditions Workpiece carbon steel (AISI 1050) Cutting tool Coated carbide ball end mill D = 6,12 mm Spindle speed, rpm 5000, 7000, 9000 Depth of cut, mm 3, 4, 5 Feed, mm/rev 0.
He designed and built a fixture to hold an end mill arbor securely during cutter install/removal.
REID Kerr College's highly- successful Creative Arts Depart-ment has moved to a vibrant new stage at Mile End Mill, one of Paisley's former thread mills.
A precision drill system and carbide end mill, slightly larger in diameter than the width of the connection, is then used to cut into the board at the proper coordinates--down to the connection and just through it--to sever the connection.
The end mill product area is regarded as strategically important, among other things for high-speed machining capability and the ability to close tolerance requirements.
Tenders are invited for Supply Of Straight Shank End Mill Cutter 3mm Dia, Straight Shank End Mill Cutter 5mm Dia, Straight Shand End Mill Cutter 7.
enter for up to 10 chances to win one of their Machined in America End Mill Tool Holders ($70 value).
Designed for 3D machining in die and mold shops, 55 percent of the KenFEED cutting edge is engaged in the cut versus 10 percent engagement of the typical ball-nose end mill, according to the maker.
2004), the FEM model of a ball end mill is made out and the cutter deflection triggered by cutting force is calculated using the model and cutting area calculated by 3D-CAD only for vertical position of tool (which is not proper for cutting in reality).
has made available two new Jabro Mini solid carbide end mill lines, including the JM100 series, which is specifically designed to machine hardened tool steels up to 65 HRc, and the 400 series for machining aluminum and copper.