These boards were cut into two end-matched samples 0.
The 20 end-matched samples, from the CCA and ACQ-D groups, were then analyzed for penetration and retention analyses, using the method described above.
NOFMA suspected that products that were factory finished, end-matched
or both were not classified as such to avoid a 3.
The serpentine end-matched
joint: Evaluating strength and stability.
Permeability of end-matched samples was induced by water submersion and bacterial inoculation for various periods of time.
The water-soaked samples and the end-matched controls were conditioned to 12 percent EMC and then measured at four locations along the side grain using a test apparatus based on the back pressure percent of regulated pressure of 138 kPa as detailed in previous articles (Boutelje and Gagglund 1988, Wallace and Schmidt 2000).