exterior plywood

exterior plywood

A structural glue-laminated timber that is made of three or more plies (usually an odd number); the glue must be waterproof.
References in periodicals archive ?
"I built several decks from 1/4" exterior plywood and they lasted about seven years," he said.
work for the project will include: 16,095 lf crack sealing (1/4" to 1/2" wide), 98,138 sy cold milling, 1" depth, 1,988 cy unclassified excavation, 455 cy borrow excavation, 16,585 ton bituminous surface course, 3" depth, 98,138 sy paving fabric, 97,897 sf temporary runway marking, 97,897 sf runway marking, 72,900 sy grooving, 4.00 ac seeding, 16,300 sy mulching, netted/binded, 33 ea 15" exterior plywood cover.
Phenol-formaldehyde (PF) was one of the original synthetic polymers, and its application to wood bonding in the 1930s allowed for the development of durable exterior plywood. The gradual increase in use of synthetic adhesives became more rapid after World War II, when the large petroleum infrastructure built to support the war effort led companies to look for new outlets for fossil-based products.
The bench frame is constructed of 1/8 x 1 1/2 x 2" angle iron, and the wooden top is 3/4", 11-laminate, cabinet-grade exterior plywood, heavily coated with varnish.
I used exterior plywood and standard pine boards for the structure.
The frame carries 11 conventional roof trusses made from wood and covered with 1/2-inch exterior plywood sheathing.
After the 2 x 6 floor joists were in place, the sub floor of 3/4-inch exterior plywood was nailed into place.
You can make your table as elaborate as you like and paint it if you want, but using exterior plywood, this simple design works just fine.
Manager Greg Mercer came up with the idea of recreating The Doctor's time-travel machine out of exterior plywood before Christmas.
For exterior plywood siding, saw-textured plywood is widely used, primarily because it improves aesthetic appeal while overcoming plywood surface checking.
This synthetic combination of exterior plywood and plastic can be installed at a fraction of the overall cost of conventional ice, says synthetic ice pioneer and manufacturer Viking Ice (Portland, Oregon), who supplied the synthetic ice for the facilities mentioned in this article.