face milling
face milling
[′fās ‚mil·iŋ] (mechanical engineering)
Milling flat surfaces perpendicular to the rotational axis of the cutting tool.
Mentioned in
?
References in periodicals archive
?
Cutting tool and tooling system specialist Sandvik Coromant has developed tools for those who are involved in milling as well as those performing turning, with the CoroMill 745 face milling cutter and the CoroTurn Prime multi-task and axial type tool holders to help machine shops implement the new PrimeTurning methodology, which enables turning in all directions.
Tenders are invited for Widia Solid Adaptor Arbour With Steep Taper With Drive Key And Bolt For M40 Face Milling Cutter: Item Sl.
With new cartridges for the F2010 face mill, Walter is making the performance of tangential indexable inserts available for adjustable face milling as well.
The MFH is ideal for a wide application range including face milling and shouldering, slotting, ramping, helical milling and plunging.
According to the manufacturer, the tool offers high performance for contouring, edging and slot, shoulder and face milling.
The Tsugami SS-32 can handle cross and face milling, drilling, and tapping, as well as angular drilling, thread whirling and polygon turning.
Abstract: The paper presents the main results of an experimental study concerning the influence of nose radius on the energy transferred through cutting tool during the face milling operation.
SDP Spider Mill is designed for high productivity face milling of gray and ductile cast irons.
It is ideally suited for large diameter boring and face milling on stainless steel, titanium, titanium alloys, inconel, ductile iron, cast iron and compacted graphite iron.
New milling capabilities include ramp, plunge, 5-axis, and pocket milling modeling, as well as face milling and full-slot cutting.
Harmonised standard EN 848-3 "Safety of wood-working machinery - rotary tool face milling machines - part 3: digitally operated drills and rippers" will not therefore be withdrawn from the list of standards published in the Official Journal of the European Communities.
It offers face milling of up to 5-in, diameter, counter-boring to 3-in, diameter, and tapping from 1.
Encyclopedia browser
?
- ▲
- face
- face alignment
- face angle
- face area
- face belt conveyor
- face blind
- face boss
- face brick
- face card
- face clearance
- Face Cloth
- face conveyor
- face edge
- face feed
- face gear
- face glazing
- face guard
- face hammer
- face haulage
- face height
- face joint
- Face Lathe
- face mark
- face measure
- face mechanization
- face milling
- face mix
- face mold
- face nailing
- Face on Mars
- face panel
- face putty
- face recognition
- Face Rock State Scenic Viewpoint
- face sampling
- face shell
- face shield
- face side
- Face side or edge
- face signal
- face stone
- Face string
- face swap
- face tile
- face timbering
- face time
- face velocity
- face veneer
- face wall
- face weight
- face width
- ▼
Full browser
?
- ▲
- face lift
- face lifting
- face lifting
- Face Lighting Method
- face like the back of a bus
- face like thunder
- face louse
- face louse
- face louse
- face louse
- face louse
- face man
- face mark
- face mask
- face mask
- face mask
- face mask
- face mask
- Face Mask and Guedel Oral Airway
- Face Mask Ventilator
- face masks
- face masks
- face masks
- face massage
- face me down
- face me out
- face me with
- face measure
- face mechanization
- Face Melting Records
- face milling
- Face mite
- face mix
- face modelling
- Face mold
- Face mold
- face nailing
- Face of a
- Face of a bastion
- Face of a gun
- face of a map or chart
- Face of a place
- Face of a square
- Face of an anvil
- Face of coal
- Face of Curb
- Face of Destruction
- Face of Flange
- Face of Harvest
- Face of Invoice Discount
- Face of Mankind
- Face of Policy
- Face Of The Day
- Face of the Franchise
- Face of the Group
- face off
- face off
- face off
- face off
- face off
- Face Off Get Off
- ▼