Similarly, feed efficiency, expressed as gain: feed ratio
(ADG to DMI ratio), was similar with DMI and ADG.
It could be seen that for all the four oils examined, there was a maximum value when the feed ratio
was 100:75 (A:C[C1.
The gradient latex particles produced are highly dependent on the reactivity ratio of the monomer pair and the monomer feed ratio
Table 3: Effect of acid-detoxified TSM-based diets on the feed intake, weight gain and gain: feed ratio
of birds Diets Feed intake Weight gain /bird/week (g) /bird/week (g) Control 117.
The experiment was planned according the course: spindle rotational speed set of 2000, 2500 and 3000 rpm was selected and for each ones drilling feed ratio
set of 60, 100 and 140 mm/min was assigned.
It was observed from those studies that lower pressure (atmospheric), higher temperature (>500[degrees]C) and higher water-to-ethanol feed ratio
were favourable for higher hydrogen production.
Presented research is an attempt of prediction of the feed ratio
and direction influence on milling inaccuracy.
The main aim of the experiments is to enable controlling the deviation values generated by influence of feed ratio
Also, the feed ratio
of the drill per revolution is greater than for conventional drilling.
Effect of Feed Ratio
of BDO to MSA on the Synthesis
From Table 4, it was unexpectedly found that the surface-free energy of sample SPU-6 was higher than that of sample SPU-2, indicating that the efficiency of long chain silicone (PDMS1000) was worse than that of short chain silicone (PDMS550) at reducing the surface-free energy of SPU coats when the same molar feed ratio
When high roughness is allowable it also is hard to fulfil condition (4) cause of limitation of feed ratio