feed tray

[′fēd ‚trā]

(chemical engineering)

For a tray-type distillation column, that tray on which fresh feedstock is introduced into the system.

Mentioned in ?

References in periodicals archive ?

Close the feed tray, point the gun toward something you dislike, and unleash chaos.

AIR ORDNANCE SMG-22: A .22 CALIBER FULL-AUTO SHIPPED STRAIGHT TO YOUR DOOR

The cloth bandolier was reinforced to allow it to be hung from the feed tray on the left of the receiver.

THE M60 GENERAL-PURPOSE MACHINE GUN IN VIETNAM: THE "PIG" AND THE "PIG HUMPER"

The proposed inspection solution involved placing a number of cameras above the final feed tray to inspect the tablets just before they were counted and bottled.

COUNTERING CONTAMINATION

When the magazine is removed, the door closes and allows belts to be fed across the feed tray again.

M2492: FN's semiautomatic variant of the battlefield legend makes civilian ownership possible

The Adaptive is a multi-feed scanner with an oversized feed tray that can accommodate documents of all shapes and sizes, from ordinary checks to full legal-sized pages.

Digital Check releases SmartSource Adaptive 2.0 Multi-Function scanner

Rear has a tapered feed tray. When turning handle, feed rollers pull in object and are cut 1/2 inch each.

Wanted: Gadgets, gizmos & contraptions; November mystery tools

It uses a flat tin feed tray holding only 20 rounds.

Trapped in Canadian ice: forever: part 2

If Soldiers will first completely raise the feed tray cover, they can easily see whether or not the locking pin is secured in the retention slot.

Raise cover to save barrel

He would ball himself up with his tail wrapped around his nose in the feed tray of one of the bird feeders and sit there most of the day.

A mysterious disappearance: accepting life's losses

Caption: The HDB1000 hologram processing machine: 250 cm length x 120 cm width x 100.5 cm height(length is 300 cm with feed tray).

Hangyo aims high in holography: introduces film processing machine

If the paper feed tray is at the bottom -- but not completely enclosed -- you have the same problem: dust, dirt and cookie crumbs inside the printer.