female fitting

female fitting

[¦fē‚māl ′fid·iŋ]
(design engineering)
In a paired pipe or an electrical or mechanical connection, the portion (fitting) that receives, contrasted to the male portion (fitting) that inserts.
References in periodicals archive ?
Female fitting model Yang Ye-won, who claimed in a YouTube post in May that she was sexually harassed by some 20 men at work, also faced automated keywords like "Yang Ye-won photos" or "Yang Ye-won buttocks" on portal sites.
12 JIC female fitting, because the increase in size was needed to attach the hose to the fitting on the lift cylinder of the skid steer.
And the male ends, where the threads were cut into, can become so thin that they leak when you try to screw on a new female fitting over the end of them.
The plain neck has a 22 mm female fitting that fits directly over a 22 mm male conical connector.
They are offered in a variety of lengths from 6" to 36", with two styles that include one with a 1/4NPT male brass fitting on each end and the other with a 1/4 NPT brass male fitting on one end and 1/8 NPT brass female fitting on the other.
Both parts are neatly integrated into a female fitting that is attached to a stubby but ergonomic handle.
A length of horizontal boring drill pipe basically is a steel tube with a pin (male fitting) on one end and a box (female fitting) on the other.
In the shorter line, made of 1/2-inch PVC, a watertight seal is accomplished by running a male-threaded slip connector through a predrilled hole in the planter bottom and into a female fitting. Silicone caulk seals the hole.
Burrs inside the female fitting can catch the tape and roll it around.
The neck has a 22 mm female fitting. The compliance of the bag becomes important if there is no way for gases to escape from the system and gas inflow continues.
Next, drill a slightly oversized one-eighthinch hole through the tapped female fitting on the end; insert the stem o f the dial thermometer through the hole; and seal the top with a bit of silicone caulk, It is important to prevent the sensor portion of the thermometer stem from being in contact with the globe.
Contract awarded for 23970078-high pressure hose 1-1/4 inch, double wire braided over all length 500mm with 1-1/2 inch bsp female fitting at both ends of delivery pipe suitable for 115 kg / sq cm working pressure, to els/gzb drg.