fiber loss

fiber loss

The amount of attenuation of signal in an optical fiber transmission.
References in periodicals archive ?
But no matter, its benefits for outweigh any kind of fiber loss.
Processing into yarn by custom mills results in fiber loss and incurs additional expense.
After completion of the modification work by ANDRITZ, the production capacity of the pulping system will be increased significantly, while at the same time energy consumption will remain unchanged, fiber loss will be reduced, and pulping efficiency improved.
These changes are characterized by increased glycolitic metabolism, muscle fiber loss, and fragmentation of submucosal elastic fibers.
The modified NLS equation integrating the effect of fiber loss SPM and chromatic dispersion (CD) is given byEquation
p] propagating along the single-mode optical fiber in milliwatt, can be expressed by the following different equations called propagation equations that include pump-to-pump, signal-to-signal and pump-to-signal Raman interactions, spontaneous Raman emission and its temperature dependency, stimulated Raman scattering, pump depletions due to Raman energy transfer, high-order stokes generation, multiple Rayleigh backscattering, fiber loss and spontaneous emission noise can be expressed by the following equations (1, 2, 3) [5-9].
Vijayshree Yadav (Oregon Health & Science University) and her colleagues found that one antioxidant in particular--lipoic acid--reduced inflammation and prevented nerve fiber loss in mice with optic neuritis (Journal of Neuroimmunology, 2002; 131:104-14).
This testing can characterize fiber loss at several wavelengths if multiple sources are available.
The gain is adjusted to compensate for the fiber loss and insertion loss due to connectors and isolator in an amplified section [5].
Whether a project encompasses reducing pad weight or fiber loss or increasing productivity, Coreforming Technologies can manufacture forming screens, pockets, or complete drums and drum formers.
Removal of wood fiber during scraping was avoided, and no observable wood fiber loss occurred.
Density analysis revealed that the samples had an average 12-16 vol% voids and that there was significant fiber loss and variation in the samples.