film resistor

film resistor

[′film ri‚zis·tər]
(electricity)
A fixed resistor in which the resistance element is a thin layer of conductive material on an insulated form; the conductive material does not contain binders or insulating material.
References in periodicals archive ?
Tenders are invited for Three terminal off line pwm switch top225yn, capacitor, metal film resistor, anabond 666 rtv silicone sealant etc.
These thin film resistor materials exhibit low current noise and lower drift than semi-precision thick film resistors.
The resistive material benchmark Ticer thin film resistor foil is thermally and electrically stable after thermal cycles.
Throughout the work reported in this paper, NiCr has been used for the fabrication of thin film heater on top of a circular glass substrate since NiCr is a widely used material for the fabrication of thin film resistor to be used at high temperatures with high reliability [9].
For the ZnO thin film resistor after the introduction of [O.sub.2] gas, the adsorbed oxygen species [O.sub.2.sup.-](ads) may accumulate around the grain boundary and cause more electron to be trapped [23, 24].
Ticer Technologies, a manufacturer of thin film resistor materials, has added TCR-HF, a low insertion loss, NiCr thin film embedded resistor copper foil designed for high frequency applications, to its range.
Coincidentally, the thick film resistor maker Rolec Electronic Corp., by actively cutting operating and production costs, has boosted its gross profit rate to 32% in the third quarter of 2009 and will probably see its EPS exceed NT$5 for the full year, the firm's second-highest level of its kind, behind only NT$6.43 posted in 1990.
One of the important features of the application is the possibility do the initial calculations which are needed for a film resistor design.
Some topics examined include characterization techniques for PCB pad cratering, thick film resistor failures, fast root cause analysis based on electrical defect localization, and scanning acoustic microscopy for solder joint failure analysis and design improvements.
These thin film resistor networks are designed for terminating LVD SCSI bus signals in large-scale applications including network switches, SAN, LAN, servers, and routers.
With a load-life stability of < 0.2 percent at 155[degrees]C and full rated power for 1,000 hours, the Vishay Dale Thin Film resistor is optimized for the low-noise, single-signal processing required to compensate for low offset and temperature drift in high-temperature environments, including under-the-hood automotive applications, high-precision oil and gas exploration, and telecommunications and industrial equipment.
Company announces the availability of its Model MP2060, TO-220 style, clip-mount, power film resistor. The 60 watt power rating at +25 [degrees] C case temperature is the highest available for a power resistor in the TO-2020 footprint.