flame-retardant coating

flame-retardant coating

A fluid-applied surface covering on a combustible material which delays ignition and reduces flame spread when the covering is exposed to flame.
References in periodicals archive ?
(12.) Wang, Zhenyu, Han, Enhou, Ke, Wei, "Effect of Nanoparticles on the Improvement in Fire-Resistant and Anti-ageing Properties of Flame-Retardant Coating." Surf Coat.
used eggshells as a novel bio-filler for intumescent flame-retardant coatings and reported that the incorporation of Al[(OH).sub.3] into the coating formula slowed down the permeation of water and the migration of fire-retardant ingredients because of its poor solubility in water.
The market mainly includes - Laying flame-retardant coating in the rail portion of the sheath Kennedy tunnel in the round part and the remaining right side of the sheath;- The installation of a fire suppression system consisting extinction line against the wall of the entire length of the sheath;- Replacement of the lighting in the sheath.
Song, "Preparation and thermal properties of a novel flame-retardant coating," Polymer Degradation and Stability, vol.
The varistors feature UL 94V-0 rated flame-retardant coating, and they are available in ammo or bulk packaging.
"Cleaning with foreign substances can render the flame-retardant coating ineffective.
TOR Coatings is a leading provider of flame-retardant coatings and the business will use the new site predominantly for warehousing, which will allow it to increase its manufacturing capacity at its Birtley site.
Flame-retardant coatings are typically used for decks, walls, rails, and load-bearing steel beams and support columns.
Although it has been possible to produce PET films with flame retardance above the VTM-2 level, these films require the use of halogenated flame-retardant additives and flame-retardant coatings, leading to higher costs and increased environmental burdens.
Ramli Sulong, "Fire-resistive performance of intumescent flame-retardant coatings for steel," Materials and Design, vol.
Physical properties of the films of flame-retardant coatings were deteriorated with the addition of PPA (flame retarding component), however, all the films of flame-retardant coatings, except AHFC-30, met the required physical properties standard for coatings.
Recently, a regulation on the emission of toxic gases of flame-retardant coatings, such as hydrogen fluoride or hydrogen bromide, has been made more strict.