fluid contact

fluid contact

[′flü·əd ′kän‚takt]
(petroleum engineering)
The site in a reservoir where there is gas-oil contact or oil-water contact.
References in periodicals archive ?
Carl Kingsley, mitigating, said: "There was a fluid contact arrangement but she refused to hand over his clothes and he kicked the door.
Normally heat transfer rate decreases with increases in flow rate because contact time between the hot wals and cold fluid decreases with increases the flow rate but in the case of nano fluid it is vice versa because when the flow rate increases the nano particles suspended in base fluid contact increases.
Disposing of fluid from suction field directly to drain is the most cost-effective solution, and also minimizes staff and patient contamination due to fluid contact.
Ebola is a horrible virus that can cause death and spread rather easily from direct body fluid contact.
Because the fluid contact layer is the same in both films, current users of PureFlex[TM] film can incorporate PureFlex[TM] Plus technology with reduced validation requirements.
Therefore, the virus can jump to humans through direct fluid contact in the process of preparing the meat for cooking.
TPUs are excellent materials for applications that involve bodily fluid contact such as catheters, balloons, stents, and other implantable devices," says Walder, who will talk on both the use of TPUs as medical grade elastomers and how different variables affect the processing of TPUs.
Picardo said: "I have no contact with Madrid, but I have a lot of fluid contact with mayors in La Linea and others municipalities in the area who are very concerned about the effect the controls being imposed by Madrid could have on the working lives of people who come in and out of Gibraltar every day.
All fluid contact surfaces of the tank, base plate and secondary containment chamber are of solid polypropylene, polyethylene, PVC or other inert thermoplastic, precluding chemical attack across the entire pH range.
8220;The addition of molded connections and container seals makes it that much more attractive to customers who need an alternative to silicone but still want a batch fill or sampling manifold with molded connections and only one fluid contact surface.
Based on Arkema's extensive fluoropolymer chemistry, Kynar RX PVDF biopharmaceutical plastics meet ASME BPE standards as a fluid contact material for high purity applications.