forging hammer

forging hammer

[′fȯrj·iŋ ‚ham·ər]
(metallurgy)
A hammer used to pound metal into forgings.
References in periodicals archive ?
Tenders are invited for installation commissioning of hydraulic forging hammer
Power hammer are forging hammer that uses a non-muscular power source in order to raise the hammer and then obtain an accelerated strike on the work piece.
To produce these products, equipment such as a five-ton free forging hammer, a three-ton forging hammer, and a 1600ton/4000ton/8000 ton pressure machineare used to help clients achieve their ideal forging solution.
IGOR SPETIC'S HAND WAS IN A FIST WHEN it was severed by a forging hammer three years ago as he made an aluminum jet part at his job.
The blame for the collapse, according to many people in the area, was the 5cwt- forging hammer at a local factory pounding from 6am to 10pm each day vibrating surrounding houses.
The torque tubes will be manufactured by Doncasters Precision Forgings in Sheffield, UK from stainless steel using the site's four tonne closed die forging hammer.
SERB-SITON isolation solution is highly efficient because the average isolation coefficient experimentally obtained is about 97% for shocks generated by the operation of the forging hammer (Serban, 2005).
Hammer size and control: For most people a 2-1/2 pound blacksmith cross peen forging hammer is best.
The pounds 500,000 hydraulic double-acting die forging hammer, produces precision forged parts in an energy efficient, environmentally friendly way.
The single biggest purchase in every sense was a new German Banning forging hammer, which came in at a hefty pounds 600,000 and is capable of delivering four tonne strikes at the rate of twice a second -sending tremors across the site and even as far as a local housing estate until retro fitted springs were installed to literally soften the blows.
Here the shoe was held in a post vise and the tips bent with a forging hammer. Be sure to bend the tips towards the nail crease side of the shoe.
The company said it was marking its 75th anniversary by buying the forging hammer and induction heating equipment at a cost of more than pounds 500,000.