forming rolls

forming rolls

[′fȯrm·iŋ ‚rōlz]
(mechanical engineering)
Rolls contoured to give a desired shape to parts passing through them.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
For conditions [E.sub.m.s] = 1 x [10.sup.6] Pa, [mu] = 0,5 (for rubber), l = 0,041 m, F = 0,22 x [10.sup.6] N/m (for pearlite containing mixtures) calculated by the equation (9) the frequency of rotation of the forming rolls is [n.sub.m.s] [less than or equal to] 2,0 [sec.sup.-1].
The New Holland BR 7090 Round Baler's redesigned bale chamber and forming rolls, in combination with the belts and the sealed adjustable hydraulic bale density system, start a core in any crop and build tight perfectly shaped bales.
The firm's engineering services using the latest CAD systems are available for custom designing extrusion tooling products, including crossheads, tips, clamps, flanges, air wipes, forming rolls, spiderless inline heads, swing gates, breaker plates, special equipment and sizing dies.
Engineering services using CAD systems provide custom-designed extrusion tooling products, including crossheads, tips, clamps, flanges, forming rolls, spiderless inline dies, dies, swing gates, breaker plates, special equipment and sizing dies.
We are expanding up and out into other areas such as cylinder molds, deckers, cleaners, washers, forming rolls, and other rotating equipment."
Two forming rolls are included for pre-forming and reduction of flat ends.
Komarek doubles machine productivity through the addition of a second pair of briquet forming rolls. The new four-roll DH500-28x27x2, which offers throughput capacity of up to 70 t/h, also incorporates an improved gravity infeed system for greater control of output consistency despite the higher volume.
Thus, the forming rolls protrude from one end of the press.
With most materials, optimum briquetting pressure depends upon the properties of the compacted materials, and upon the combination of stresses that the forming rolls exert on those materials.
Also offered are engineering services using the latest CAD systems for custom-designing extrusion tooling products such as crossheads, tips, clamps, flanges, forming rolls, spiderless inline dies, dies, swing gates, breaker plates, special equipment and sizing dies.
Their CAD engineering services are available for custom-designing extrusion tooling products such as crossheads, tips, clamps, flanges, forming rolls, spiderless inline dies, swing gates, breaker plates, special equipment and sizing dies.
With most materials, optimum briquetting pressure depends upon the [TABULAR DATA FOR TABLE 3 OMITTED] properties of the compacted materials, and upon the combination of stresses that the forming rolls exert on those materials.