foundry type

foundry type

[′fau̇n·drē ‚tīp]
(graphic arts)
Type cast as single characters. Also known as hand type.
Mentioned in ?
References in periodicals archive ?
DC: Those found in any well-equipped mid-20th-century job shop: Linotypes, foundry type, saw, mitre cutter, strip material, furniture, quoins, chases, Gordon and Heidelberg platens, Kelly and Miehle cylinders, cutters, folders and all the minutiae of letterpress printing.
With a few exceptions, most foundry type and Linotype mats seem to have been acquired in the 1950s.
Supplies for eau de paris from: - - cast iron and steel products and materials of the foundry type (lots 1 and 2) and cast iron castings (lots 04), for the manufacture of elements for hydraulic roadworks (wash-out, watering, fire, watering or filling) "model city of paris", "fortin herman" and "ghm", drinking fountain, pumping equipment, rotating machinery and pipe supports (dn 60 to 600mm) - - leather goods and material (lot 3) for hydraulic machine valves - - bronze cast bronze type products and metallurgical materials (lot 5), for manufacture of centrifugal pump half wheels - cast elements and aluminum finish (lot 6) for market terminals and arch fountain
The titles were set in foundry type, but the bulk of the book was composed by Linotype.
The title and introduction were set in foundry type, and the body text was set by Linotype.
Reports are further broken down by foundry type, size, geographic location and on an overall basis.
After printing, slugs were melted down so that type metal could be used again, eliminating the need to store tons of foundry type. Matrices returned by means of a distributing mechanism to their respective channels in the magazine until called into service again.
Economics of a Green Sand to Green Sand Reclamation System GENERAL DESCRIPTION Foundry Type Green Sand Steel Product Type Railroad Production Rate 22 tons of castings/shift Typical Sand-to-Metal Ratio 2.5:1 Sand System Size 800 tons Sand Type Round Grain Silica, 85 AFS GFN Sand Usage 15.3 tons/hr Year Started 1976 Capacity 8 tph; 32,000 tpy Actual Production 4 tph; 16,000 tpy Yield 85% New Sand:Reclaimed Sand 0:100 Disposal 15% Description of Reclamation System Pneumatic reclaimer, feed Purchased During Project: hopper, cyclone, dust collection and installation.
For this reason, Polk and Polk strongly advised against the mixing of spacing material from Monotype composition with that to be used in hand-setting foundry type.
Foundry Production Per Worker (Metric Ton) Year Foundry Type Cast Iron Cast Steel Nonferrous 1991 64.1 44.0 18.6 1994 71.0 44.3 20.9
As stated, a crucial factor for success is to have a good cross-sectional base of foundry types and sizes to get accurate data, which is not skewed.
Annenberg's criteria for inclusion were: (a) case-bound books only -- no pamphlets, except for early ones, and no showings of individual type families; (b) foundry types only -- no wood type or Monotype; and (c) books issued by foundries only -- no agencies.