gear(redirected from geared towards)
Also found in: Dictionary, Thesaurus, Legal.
gear,toothed wheel, cylinder, or cone that transmits motion from one part of a machine to another; it is one of the oldest means of transmitting motion. When the teeth of two gears are meshed, turning one gear will cause the other to rotate. In most cases both gears are mounted on shafts so that when one shaft turns, the other also rotates. By meshing two gears of different diameters, a variation in both speed and torque between the two shafts is obtained; the smaller gear in this case is called the pinion. A spur gear consists of a wheel with straight teeth mounted radially either on the inner circumference (internal spur gear) or outer circumference (external spur gear) of the wheel. Two meshed spur gears are used to transmit motion between parallel shafts. A rack and pinion consists of a pinion engaging and transferring motion to or from a special kind of spur gear, called a rack, consisting of a series of teeth in a straight line on a flat surface. The rack and pinion changes linear motion into rotary motion, or vice versa. A helical gear is similar to a spur gear, but its teeth are twisted instead of straight. Helical gears can be used to transmit motion between shafts that do not intersect and are at any angle with respect to each other. A bevel gear has straight or curved teeth on a conical surface near its rim. Bevel gears are used to transmit rotary motion between shafts that are not parallel and that would intersect at an angle if extended. Hypoid gears are special bevel gears used in the differentialdifferential,
in the automobile, a set of gears used on the driving (usually rear) axle. The two wheels on the driving axle must be interconnected in order to receive their energy from the same source, the driving shaft; at the same time they must be free to revolve at different
..... Click the link for more information. of an automobile to connect the drive shaft to the rear axle. A worm gear, meshed with a threaded cylinder, or worm, that resembles a screw, is used to transmit motion between perpendicular, nonintersecting shafts. See transmissiontransmission,
in automobiles, system of parts connecting the engine to the wheels. Suitable torque, or turning force, is generated by the engine only within a narrow range of engine speeds, i.e., rates at which the crankshaft is turning.
..... Click the link for more information. .
See D. W. Dudley, ed., Gear Handbook (1962); H. J. Watson, Modern Gear Production (1970); R. J. Drago, Fundamentals of Gear Design (1988).
the main part of a gear drive, in the form of a disk with teeth on a cylindrical or conical surface engaging the teeth of another gear. Spur gears can have external or internal teeth. The teeth can be spur, helical, double helical (angular), or curvilinear. The most common tooth shape is invo-lute; less often it is cycloid or some other form. Gears are also called pinions. In reduction gears, for example, the small driving wheel is customarily called a pinion regardless of the number of teeth, and the large driven wheel is called a gear. Often all gears are called pinions. The design of a gear de-pends on its purpose, size, and means of manufacture.
A machine element used to transmit motion between rotating shafts when the center distance of the shafts is not too large. Toothed gears provide a positive drive, maintaining exact velocity ratios between driving and driven shafts, a factor that may be lacking in the case of friction gearing which is subject to slippage.
The application of gears for power transmission between shafts falls into three general categories: those with parallel shafts, those for shafts with intersecting axes, and those whose shafts are neither parallel nor intersecting but skew.