grid voltage

grid voltage

[′grid ‚vōl·tij]
(electronics)
The voltage between a grid and the cathode of an electron tube.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
[USPRwire, Wed Aug 21 2019] The requirement of AC stabilized power supply in the area of fast load variation, and the power grid voltage fluctuations are increasing.
GE's power electronic equipment, STATCOM, fine-tunes the grid voltage--generating or absorbing reactive power when the grid voltage changes.
Inverters continuously track utility grid voltage to synchronize integration and distribution line voltages.
Furthermore, the literature [8] pointed that multi-inverters grid-connected system would generate grid voltage harmonic distortion and grid-connected current oscillation in multi-inverters grid-connected distributed generation system.
These electronic devices mostly used different voltage magnitudes and types than the AC grid voltage, and therefore, required power supplies to convert the grid voltage to a suitable conditioned voltage for their use.
Get Free Exclusive Sample Copy of This Report @ https://www.factmr.com/connectus/sample?flag=S&rep_id=2782 The requirement of AC stabilized power supply in the area of fast load variation, and the power grid voltage fluctuations are increasing.
Through this system, the four functions of primary control reserve(2) supply, secondary control reserve(3) supply, balancing(4) within a balancing group(5), and reactive power supply(6) that stabilize local grid voltage will be realized to replace the functions of conventional power plants.
Moreover, he said the required reactive power could be efficiently supplied into the grid system to maintain its grid voltage and reduce line losses.
The control strategy injects the phase current in two stages; i.e., when the grid voltage is lower than the PV voltage, the control strategy drives only the full bridge to modulate the phase current.
In this case, the model uses the DC side current as an input and the generated power as an output; neither the grid voltage or burst mode operation is considered in developing the model.
Considering a worst-case design for the duty cycle, the zero crossing the grid voltage, a duty cycle of D = 0.5 was selected.