guard arm

[′gärd ‚ärm]

(electricity)

Crossarm placed across and in line with a cable to prevent damage to the cable.

Crossarm located over wires to prevent foreign wires from falling into them.

Mentioned in ?

References in periodicals archive ?

Contract awarded for 9021n30-coupler contour gauge, set of two gauges for contour worn limit gauge no.1 and gauge no-2 of g-80 manual for cbc made of hard alloy steel used for inspection of coupler body (knuckle and guard arm), u

9021n30-coupler Contour Gauge, Set Of Two Gauges For Contour Worn Limit Gauge No.1 And Gauge No-2 Of G-80 Manual For Cbc Made Of Hard Alloy Steel Used For Inspection Of Coupler Body (knuckle And Guard

The restructuring of Rentokil Initial continued yesterday as the troubled firm offloaded its UK security guard arm for pounds 74.8m.

Rentokil loses security arm to seek increased profits

Overall, results from Group 4's European security guard arm were described as good, with Sweden, Norway and Poland all returning to profitability after reporting losses in the same period last year.

Group 4 Securicor finding it tough

Most pilots reported that they had been unable to achieve the objectives of the mission to hit the Republican Guard arm ored brigade, knock out its tanks and pierce its artillery.

WAR IN IRAQ DAY 5 - IRAQIS FIGHT BACK: Gunships face heavy barrage

Tenders are invited for Lock Contour Guard Arm Side As Per Rdso Drg.

Set Of Carriage And Wagon Gauges For Freight Maintenance Consisting Of 13 Items As Per Rdso Drg. Attached As Annexure -a

Tenders are invited for Vertical Height Condemning Limit Aligning Wing Pocket And Guard Arm Gauge No.

Vertical Height Condemning Limit Aligning Wing Pocket And Guard Arm Gauge No. 44250 Apta Gauge No-go. Tool Steel As Per Is:3748/1990 Duly Hardened And Ground. As Per Figure No. 5.11 Of Maintenance Manual Of Lhb Coaches Copy Attached

Tenders are invited for Vertical Height Aligning Wing Pocket And Guard Arm Guage For Checking Cbc.

Vertical Height Aligning Wing Pocket And Guard Arm Guage For Checking Cbc. H Type Coupler. As Per Rdso Specification No. Rdso/2011/cg-03 Of Oct-2011.material Tool Steel:is-3748/90.hardness-50/55 Hrc Calibration Certificate Is Required. 24 Months Guarantee

1 And Gauge No.2 For Cbc Made Of Hard Alloy Steel Used For Inspection Of Coupler Body Knuckle And Guard Arm Useful For Reconditioning And Repairing Of Coupler.

Fitters Tools:- Pie Brand Coupler Contour Gauge: Set Of Two Gauge Gauge No. 1 And Gauge No.2 For Cbc Made Of Hard Alloy Steel

Tenders are invited for Lock Contour Gauge Guard Arm Side To Drg.

Lock Contour Gauge Guard Arm Side To Drg. No.- Wd-84073-s/56rc, Alt.- 04

6 Vertical Height Aligning Wing Pocket And Guard Arm Gauge Go-Gauge-Must-Pass ,Apta 34101-4.

Set Of Gauges For Checking Escorts Make Cbc And Knuckle H-type Tight Lock Coupler Fitted In Lhb Passenger Coaches Rdso,specification No.rdso/2011/cg-03-oct-2011. 1 Contour Maintenance Gauge. Knuckle Profile Gauge Apta Draw 31000. 2 Aligning Wing Limit Gau

Tenders are invited for Vertical Height Aligning Wing Pocket And Guard Arm Gauge Go-Gauge-Must Pass Similar To Ftil Pt No.229676-W-11.

Vertical Height Aligning Wing Pocket And Guard Arm Gauge Go-gauge-must Pass Similar To Ftil Pt No.229676-w-11. Material Tool

Tenders are invited for Cbc Vertical Height Aligning Wing Pocket And Guard Arm Gauge No-Go Gauge-Must-Not-Pass Ftil Part No.229677W11 Material Tool Steel Is-3748/90.

Cbc Vertical Height Aligning Wing Pocket And Guard Arm Gauge No-Go Gauge-Must-Not-Pass Ftil Part No.229677W11 Material Tool Steel Is-3748/90. Supply With Calibration Certificate And Warranty Certificate For A Period Of 24 Months As Against Any Mfg. Defect

Full browser ?

CITE

Site: Follow: Share:

Open / Close