In his opinion the linerless label applicator developed by Avery, with its heat-activated adhesive
, "does not meet the bill" because in his opinion it is "too complicated.
The top tape, or cover tape, is sealed over the pockets by either heat-activated adhesive
(HAA) or pressure-sensitive adhesive (PSA).
The sleeves are gravure printed in nine colours onto high shrink PVC and the print specification also includes a heat-activated adhesive
to prevent sleeve rotation.
To produce closed-container parts, a second film with a heat-activated adhesive
is inserted into the press after the first film is formed but before it is demolded.
The resulting extrusion was too stiff to make a good seal and the heat-activated adhesive
was too thick and bulky, making the profile unsuitable.
This stencil is attached to the mold with a continuous heat-activated adhesive
Assuming they are approved by the EU Council of Ministers, three-year (almost entirely) duty free quotas, unlimited in scope, will be opened for products, including cartridges containing an adhesive based on a mixture of silicon modified polymer and aluminium hydroxide for use in the manufacture of deflection yokes; adhesives based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate; and heat-activated adhesive
film on a release paper based on phenolic resin and rubber.
Carson, CA), which acquired LOM from Helisys, builds wood-like parts using a laser to cut layers of thin paper coated with heat-activated adhesive
3M transport solutions, which includes 3M polystyrene carrier tape 4000, the new 3M static dissipative pressure-sensitive adhesive cover tape 2684 and 3M static dissipative heat-activated adhesive
cover tape 2686, provide a total system solution to ensure the protection of static-sensitive active components and the precise delivery of them to the final assembly point.
Labels that are applied to containers made using the extrusion blow molding process receive a heat-activated adhesive
on the reverse side; this adhesive is activated during the molding process.
In addition, a revised formulation of the heat-activated adhesive
and an embossed pattern on the tape have improved operator set up times and application.
A third layer of a conventional nonwoven material is bonded by heat-melting to one of the layers of carded fibers on its side coated with a heat-activated adhesive