Combi nuts - sometimes known as carp nuts, these combine a plain or domed washer assembled into a hexagonal nut
so saving time, operations and loss of washers.
Connectors are fixed from the rear of the panel with a hexagonal nut
The hexagonal nut
of the end cap is made smaller so that the heater housing will pull off the nozzle and clear the tip end while leaving the end cap and tip in place.
Expander connectors and end caps are in black polyamide with the two connector parts connected together by means of pins which are housed in special counter-seats - two tapered cavities inside the connector are provided for housing a hexagonal-head screw or a hexagonal nut
Limited Tenders are invited for G I Bolt of size 16 x 75mm for safety chain, with one 16mm dia x 12mm, thickness hexagonal nut
Transformer having following specification - Total length 60 mm One side threaded upto 40 mm suitable for 12 mm nut other side fixe hexagonal nut
of length 20 mm w/th inner side threaded for 12 mm.
Each set consisting of: 1 set of pin and suitable Hexagonal Nut
for brake head hanger as per CLW Drg.
Metric Thread Required For Roof Bolts In Ug Mines
Is:1364,Pt-3/2002 All Galvanised Is:1367,Pt-Xiii/1983 ,All Assembled Condition.
Tenders are invited for Set Of Galvanised Hexagonal Nut
And Spring Washer For Emu Coaches Consists Of The Following 02 Items And Quantity Mentioned Against Each.
, All Are Galavanised In Assembled Condition Conforming To Is : 1364 Pt.
Tenders are invited for Hexagonal Nut
, Thickness Not Less Than 30Mm, Internal Dia 3/4 Inches Conforming To Latest Dgms Circular.