In this capacity, he will be responsible for overseeing the operation of the Fracture Mechanics Test Lab and handling proposals for fatigue crack growth, fracture toughness, high-cycle fatigue
and other testing performed by the department.
As a result, the fuel pump welds in these vehicles may be susceptible to high-cycle fatigue
fractures that could cause the fuel pump to move relative to its mounting flange, resulting in eventual loss of the sealing integrity of the cam cover or the fuel lines and an oil or fuel leak, increasing the risk of fire.
Lopez De Lacalle, "Influence of low-plasticity ball burnishing on the high-cycle fatigue
strength of medium carbon AISI 1045 steel," International Journal of Fatigue, vol.
As stated earlier, for the high-cycle fatigue
, the total damage is a sum of the fatigue and static damage components.
So far, studies on high-cycle fatigue
behavior of GFRP based on full-scale components are found lacking.
Zhang, "Deformation of concrete under high-cycle fatigue
loads in uniaxial and eccentric compression," Construction and Building Materials, vol.
The critical locations in the lower sheets for initiation of high-cycle fatigue
failure are marked by "HCF Fracture" in the figures.
With this method, the elastic strain-life curve according to  is divided into three different parts describing the single fatigue tests and thus the material behavior in the low-cycle, the high-cycle and the very high-cycle fatigue
regimes much better.
In this work, Q345 and QSTE700 steels two common materials used for making H-shaped frame beams were employed in high-cycle fatigue
tests to study the fatigue characteristics of H-type automobile frame girders.
The algorithm considers the redistribution of stresses in reinforced concrete columns subjected to high-cycle fatigue
The dividing line between the low-cycle and the high-cycle fatigue
is determined at the point where the fatigue curve, plotted in the natural coordinates, goes from convex to concave.
Some specific topics include laser shock processing of Ni-base supperalloy and high-cycle fatigue
properties, the effect of square wave AC parameters on weld forming performance, the dissolution mechanism of copper weld brazing with Cu-based brazing alloys, and a morphological filtering algorithm for estimation of tool wear in CNC milling machining.