7 Trim the top shelf ends to fit the side walls, drop the shelf into place, and nail it to the tops of the vertical dividers and to the hook strip with 6d nails.
3/4" x 4' x 8' sheets of oak plywood 1-1/2 1/2" x 2-1/2" hook strip 24' 1/2" x 3-1/2" hook strip 9' 1/4" x 3/4" x 8' screen molding 4 1-1/16" closet rod 8' Pairs of rod holders 4 6d finishing nails 1 lb.
We'll be using hook strips to attach the center unit and shelves to the closet walls, as well as for spacing the uprights (Figure A).
Use a small cloth to rub a generous amount of oil into the surface until the plywood and hook strips have an even sheen, and allow it to dry overnight.
Lightly mark the vertical dividers where the interior shelves and hook strips will be positioned and drill 1/8-in.
Position one of the center unit's interior hook strips at the very top of the dividers and one above the bottom notches, and one under each shelf.
Installation is simple--after permanently attaching six peel-and-stick hook strips to our umbrella, the ezShade gets looped on when we reach our destination.
EzShade comes with extra peel-and-stick hook strips so the curtain can be repositioned as the sun moves.