hydraulic motor

hydraulic motor

[hī′drȯ·lik ′mōd·ər]
(mechanical engineering)
A motor activated by water or other liquid under pressure.

hydraulic motor

A motor that is driven by the flow of hydraulic fluid.
References in periodicals archive ?
The system includes two separate power sources: a compact hydraulic motor that provides low-speed torque for precise control of the rotational drive, and two precision pneumatic drive systems that provide power for the axial feed system and for the accessory grinding attachment.
Other features include on-demand steering that lowers noise levels, a single hydraulic motor designed for improved efficiency, and faster lift speeds for increased productivity.
One pump powers a hydraulic motor, through an in-line planetary gearbox, to the capstan while the second pump drives the rope take-up drum through a hydraulic motor.The hydraulic oil tank is fitted with double filtration protection, sight glass and filler/breather.The rope take-up drum is removable and can be split to enable rope removal.
Its axle assemblies are built to spec requirements, offering inboard or outboard planetary, single reduction in either steer or rigid systems with inputs options that can include hydraulic motor, flange or NEMA face.
Three Clean-Tek B60 compact washing machines have been supplied by the WHEELABRATOR GROUP LTD to Meltham Mills Engineering Ltd, manufacturers of hydraulic motor drives.
With two types of motors, three basic motor constructions, numerous variations on these designs, and more than 20 hydraulic motor manufacturers and hundreds (if not thousands) of models, selecting the right motor for an application can lead to a confusing array of options and configurations.
For the past five years, with no fanfare Farrel has been using a radial-piston hydraulic motor on single-screw extruders that are gravity-fed hot compound from another extruder or mixer.
A hydraulic motor, MWH's report said, virtually would be maintenance free.
Built around the proven Mueller air motor design, the H-704 hydraulic motor can be counted on for many years of dependable operation.
Designed especially for molding eccentric screw caps, the individual components of the unscrewing device are a hydraulic motor controlled by a proportional valve, a control board and an incremental rotation sensor.
The new OHLA is designed to eliminate premature hydraulic motor or pump bearing failure due to overhung radial and/or axial loads on motors or pump shafts.
Improvements to the line include faster and more accurate positioning of the rotary table, thanks to a higher-torque hydraulic motor and a mare precise system of gears.