inductive load

inductive load

[in′dək·tiv ′lōd]
(electricity)
A load that is predominantly inductive, so that the alternating load current lags behind the alternating voltage of the load. Also known as lagging load.
References in periodicals archive ?
In order to assure a longer lifetime for this board, and prevent EMI-RFI noise, the IA-3172-U2i-P features voltage suppressors for each relay, keeping the switching voltage to working level in order to avoid transient voltage damage to the relay in inductive load cases.
The equations related to the operation of the circuit are deduced for the purely resistive load and for the inductive load. Simplified design equations are also presented.
Ultimately, application of IGBT's and MOSFET's is advantageous, however the high current (> 500 A) and voltage (> 2 kV) ratings, transient processes during pulse shaping (inductive load), all form a challenging electronics and electrical engineering problem.
As evidenced, if the three-phase inverter feeds the induction motor (ohm's law inductive load) and if [lambda] = 180[degrees], the form of the current and the changing schema of the commutation intervals do not depend upon the load power factors.
In selecting the inducting load to the secondary winding in the circuit of the transformer you muse uncheck the capacitor in the RLC branch of Figure 7 to select the inductive load than write the values of the inductor or capacitor you want of your desired.
Poor load current phase angle is generally the result of an inductive load such as an induction motor, power transformer, lighting ballasts, welder or induction furnace.
An inductive load of high power consumption (0,25 MVA and power factor of 0,85) was included in the distribution system.
source voltage: 415 V, 50 Hz; load parameters: resistive load: 10 K[OMEGA]; inductive load: 2 mH; RLC load: 10 KW;
In the case of designing thin RAM layer whose thickness is less than quarter wavelength, the transmission line can be considered as an inductive load since its admittance [Y.sub.L] is
The new 15 kW and 30 kW PLAD designs lower the cost of voltage surge protection, preventing the disruption of digital signal processing, component damage and interruption of function due to inductive load dumps or the indirect effects of lightning.
The test simulates transients from inductive load kickback series current interruption, ignition shut-off and d.c.
I d, Megger, Earth Tester, 3 Phase Inductive Load, Phase Capacitve Loadi, Slip Ring Induction Load 3 HP, Semi Automatic Star Delta Starter, Contractor Type Star Delta Starter