injection fluid

injection fluid

[in′jek·shən ‚flü·əd]
(petroleum engineering)
Gas or water, depending on the nature of the reservoir and its fluid content, for injection into the formation to increase hydrocarbon production.
McGraw-Hill Dictionary of Scientific & Technical Terms, 6E, Copyright © 2003 by The McGraw-Hill Companies, Inc.
References in periodicals archive ?
Specifically, the tag is affixed to the lowest position of the plastic or rubber IV bag full of injection fluid. In this work, the injection fluid itself is used to change the antenna resonance mode for two different applications.
During injection, the large volume of cold injection fluid decreases reservoir temperature, but the resin requires a certain temperature to fuse the proppant particles together.
Other drugs taken were Norodine granules - an off-white powder wrapped in silver foil - depocillin, ketaset, euthal and diazepam, detmoidine hydrochloride, torbugesic, virbaxyl, equipalazone and ACP injection fluid.
In the present work it has been worked out the optimization of main ejector parts, where a special importance has the working fluid pressure behind the nozzle, injection fluid and mixing fluid, and as the relevant cross sections as well in the injection coefficient.
The process shortens the time required to rejuvenate cable by lowering the viscosity of the injection fluid, thus making it easier for the fluid to flow along the length of the cable.
Applications include products for orthopedic applications and prostheses, disposable syringe and dialyzer seals, medical tubing for artificial respiration equipment, stoppers for injection fluid bottles, anesthetic face masks and catheter bags, as well as gels for coating wound dressings.
Auburn, WA, December 20, 2013 --(PR.com)-- Novinium, the world's most advanced cable-rejuvenation solution provider, announces today the reformulation of its Perficio[TM] injection fluid and patented, state-of-the art Ultrinium[TM] injection fluid to improve performance and worker safety.
This brochure features injection fluid warmers, irrigation fluid warmers, and combination fluid and blanket warmers.
The umbilical system will provide power supply, communication services and chemical injection fluids. It will connect the subsea equipment to three new wellhead platforms and link the topside equipment located on the offshore control platform to equipment located onshore.
The fluid warmers feature programmable controls with maximum temperature settings for injection fluids at 104[degrees]F and 150[degrees]F for irrigation fluids.
The upper fluid compartment holds up to 36 liters and can be set to safely warm either irrigation or injection fluids. The lower blanket chamber has a capacity of 30-40 blankets.