insulation test

insulation test

A test to determine the resistance of electrical insulation to the flow of direct current.
Mentioned in ?
References in periodicals archive ?
Recommendations were also made in relation to impact sound levels for floors and walls, sound insulation of waste pipes, and a new quantitative impact sound insulation test for walls.
01 megaohm to 2 gigaohm, and insulation test voltages of 50, 100, 250, 500, and 1000V.
The insulation test, from which the state will derive new revenue, will be multiple-choice and cover practical knowledge and code requirements.
1 year Insulation Test 1 Hour 546-048 Starter PdM/IR 1 year Thermograph test 2 Hours of starters Figure 1: Recommendations from an RCM analysis.
It is designed to carry out the following: insulation test (500V dc), earth bond test 200 mA and 25 A with test lead zero facility, substitute leakage current test, IEC lead test, leakage test, appliances power and load current test, PELV test (protective extra low voltage).
These include an insulation test for piezoelectric sensors and checking the sensitivity of Priamus' Priased cavity pressure sensors, even when already mounted in the mold.
For the latter case, a very low temperature of the refrigerant was required in order to create a measurable radial heat flux across the pipe insulation test specimen.
The 18 attributes for the 32 PAT testers featured comprise characteristics like different types of test (earth bond, insulation test voltage, etc) and options like Bluetooth wireless communications, barcode scanning, and so on.
The PAT450 can perform a variety of tests such as an earth bond continuity test that verifies the integrity of exposed metalwork on grounded (Class I) appliances; an insulation test that checks that equipment conductors are isolated from ground to 500 Vdc and a touch current test that powers the asset at the supply voltage as if it were in use.
He repeated the insulation test in the living room.