joint tape

joint tape

A tape used to cover joints formed by adjacent sheets of wallboard.
Mentioned in ?
References in periodicals archive ?
Frank Turner AGET your hands on a roll of FibaTape/Self Adhesive Joint Tape. Stick that over the crack and cut it with a Stanley knife.
Next, get some easy-fill filler and apply two thin coats over the adhesive joint tape. Sand it and give the repair two coats of paint.
I would use plasterboard self adhesive joint tape. Stick this over the cracks, removing any loose dust as you go.
Top tip HAIRLINE cracks on a wall can be easily repaired by sticking a piece of fibre tape or joint tape over the crack.
Then apply joint tape and additional mud coats (Photo2).
The company's first 2-inch Brad Nailer Combo Kit includes an 18-gauge heavy-duty pneumatic brad nailer, a 2.5 HP max (1.1 HP continuous) four-gallon oil lube side stack compressor, a 25-foot vinyl air hose, fittings, and pipe joint tape. The nailer holds 110 nails from 5/8-inch to 2 inches long and can be used on both hardwoods and softwoods.
There are three types of Aimes tape - a metal, corner tape, paper joint tape for interior corners, and self-adhesive fibre tape for flat seams.
For a basic joint, spread joint compound over the steam and embed a strip of joint tape in the compound.
You can sort it with a roll of FibaTape, or any other self adhesive joint tape. This tape is used to cover joints in plasterboard.
joint tape Suzanne, via email AYES, they work, and if you like the look it's an easy solution.
If you are going to redecorate, cover the crack with self-adhesive joint tape, cover the tape with two coats of filler, sand and paint.

Full browser ?