lake sand

lake sand

Sand consisting mainly of rounded particles as contrasted with bank sand which has sharp edges; the latter is preferred in plastering.
Mentioned in ?
References in periodicals archive ?
Scope: The Grant County Sheriffs Office will use this grant to provide ongoing maintenance and operation to support off-road vehicle use for the Moses Lake Sand Dunes (MLSD).
has received extremely positive results from the continuous exploration program at its McClelland Lake sand property in Alberta, Canada.
The size of a few grains of lake sand, the chip contains a flow-through window the width of two human hairs packaged with a dual-core processor.
Because of import restrictions on the most common Chinese sand, the researchers selected North American lake sand that had shown similar performance in previous testing.
Studies of Volsky (1962) show that baths from the artificially heating lake sand have curative effect in treating rheumatism, diseases of peripheral nerves, joints, inflammatory diseases of genital organs, they reduce arterial pressure.
Cedar Lake Sand and Gravel Co., 480 F.Supp.17 (E.D.Wis.
Comparison of Mold Hardness and Other Sand Property Test * Test Lake Sand Round Grain Compactability (%) 30 35 40 30 35 40 Bulk Density (g/cu.
According to Fowler, Fairmount began its mission to lessen its environmental impact in the late 1970s, a time when it was known for destruction in the pursuit of mining Michigan lake sand for use in metalcasting facilities.
Core and Mold Systems Examined Uncoated Al-SiO-Based Coating Lake sand (GFN 45-55); 1.63% PUCB; Lake sand (GFN 45-44); 1.63% PUCB; no additives no additives Lake sand (GFN 45-55); 1.6% Lake sand (GFN 45-55); 1.6% epoxy acrylic; 0.05% AV-M additive epoxy acrylic; 0.05% AV-M additive Lake sand (GFN 45-55); 1.6% PUCB; 8% AV-VS additive Green sand; 8% clay and 4% water
For green sand molding, the 10-20% of the mixture not composed of silica or lake sand will be made up of the clay bonding mechanism.
Whether it is the use of anti-veining agents of lake sand instead of silica sand, the methods add cost to casting production.