lamination


Also found in: Dictionary, Thesaurus, Medical, Wikipedia.

lamination

[′lam·ə‚nā·shən]
(graphic arts)
A plastic protective film on a printed sheet that has been bonded by heat and pressure.
(materials)
One of the thin punchings of iron or steel used in building up a laminated core for a magnetic circuit.
(medicine)
An operation in embryotomy in which the skull is cut in slices.
(science and technology)
Arrangement in layers.
References in periodicals archive ?
Foam textile laminations Thanks to their good environmental compatibility, modern hotmelt techniques are also now being used for foam-textile lamination applications.
Therefore, measurement needs to incorporate the layer-by-layer distortion during the lamination process and all prior processes.
All rolling-mill trains must have a water treatment plant for cooling purposes and to eliminate the particles which the water picks up in the lamination process.
And there is no need to overdose it to compensate for lubricant migration from the sealant layer after lamination.
If you have not processed a lamination recently, run a few inches of APF and verify there are no wrinkles occurring at the nip rollers and inspect the now laminated companion roll material to assure a smooth, wrinkle-free appearance.
On the other hand, 170,000 of these cards are in process and are awaiting lamination for the past several weeks.
Tender notice number : B4/2742/2019 Lamination Photos - 2019 (Tender ID: 140103)
[USPRwire, Tue Aug 13 2019] Thermal Lamination films Market: an overview Thermal lamination films are decorative films, which are extrusion coated with thermal adhesives.
In order to increase the efficiency of electric vehicle (EV) motors, the geometries of motor laminations have become more and more complex, and consequently, the dies needed to stamp them are getting longer and longer, says Schuler Group (schulergroup.com) E-Mobility product manager Simon Schmidt.
[ClickPress, Tue May 14 2019] Cold seal lamination pouches can be used for the lamination of a variety of products such as photos, ID cards, credit cards, etc.
Ripple cross-lamination and Planar horizontal lamination sandstone facies represent deposition in lower velocities regime at shallower depth.
Additionally, the company manufactures performance lidstock products, induction heat seals and specialty lamination structures that target hard-to-hold products and those requiring puncture resistance.