The axially inner end face of a first long lug of a row of lugs is separated from the trailing lateral face
of the second long lug of the symmetrical row of lugs, closest to the axially inner end face of the first long lug, by an end groove with a width at least equal to 10% and at most equal to 100% of the lug height.
(6,7) The line of both skin incision and osteotomy is determined by putting a Kirschner wire over the lateral face
of the calcaneus under fluoroscopy, ensuring not to harm the insertion of plantar fascia, Achilles tendon, and the subtalar joint.
Tenders are invited for Carriage Block With M16 Fixing Screws : Technical Specification Total Height H-90Mm Total Width B-170Mm Total Length L-261.9Mm Lubrication Connection Should Be On Lateral Face
The centrum is cylindrical, with a marked longitudinal crest on the lateral face
. The centrum bears an amphicoelous condition, concave anterior and posterior articular facets.
Remarks: Lateral face
, hemispherical shell, domed with slight undulations on the surface, with a flap on the shell base, and a small, invaginated buccal tube.
The basal cross-section is sub- circular with a flattened lateral face
X-rays PA and lateral face
views were advised to rule out the suspicion.
A final chapter details the GFA of the lateral face
by means of eight angles and indices, with special attention given to the nose and ear.
All foramina were found at the body of lumbar vertebrae on their right lateral face
. Four of these vertebrae were lumbar 2 and three of them lumbar 5.
The left lateral face
of the Aristoteles Decree stele (IG II2 43), the most important epigraphic source for the Second Athenian League, presents numerous problems of interpretation.
For example, Laura made the following journal entry after a class discussion about the distinction between a base and a lateral face
: "Pyramids always have a vertex at the top, no matter how many faces.
Key statement: A tire mold part having a body with a first surface intended to mold all or part of a tread surface, a second surface opposite the first and intended to contact another part of the mold, and a lateral face
connecting the first surface and the second surface.