leakage resistance

leakage resistance

[′lēk·ij ri¦zis·təns]
(electricity)
The resistance of the path over which leakage current flows; it is normally high.
References in periodicals archive ?
Preconditions have to be proven for participation in the competition: - explosion protection characteristics of powdered activated carbon: - minimum ignition energy greater than 100 joules with the 20 liter ball, - dust explosion class 1, - smoldering temperature greater than 400 o c, Ignition temperature greater than 290 o c, - specific electrical leakage resistance less than 10 3 ohms, - proof: Offered activated carbon powder has a fuel efficiency of 1 or 2, - proof / report on the suitability of the powdered activated carbon for sak 254 nm reduction or doc reduction and trace gas sampling (carbamazepine and diclofenac) in municipal wastewater, - confirmation of delivery from october 2018 to december 2020, Total amount of about 320 tons per year (total 640 t).
Current code R-values only consider thermal resistance for conductive heat transfer and exclude air leakage resistance (convective heat transfer) and energy losses associated with it.
w.g.) or a building enclosure requirement to meet an air leakage resistance of 2.0 L/s-[m.sup.2] at 75 Pa (0.39 [ft.sup.3]/min x [ft.sup.2] at 0.3 in.
The harmonics argument differences (obtained from PC) can be further used for signalizing of the decrease in the leakage resistance as well as for tripping faulty line.
Their most significant advantages are extended shelf life, good low-temperature operation, high operating voltage and excellent leakage resistance. The 20 mm-diameter lithium button batteries, however, have brought new challenges to pediatric health care providers.
However, to be useful, their capacitance value, voltage rating, temperature coefficient and leakage resistance must be characterized.
A 1-G[ohm] leakage resistance has been assumed that, without the guard, would cause an additional 15 nA to flow through the ammeter.
The current of surface leakage is determined by a certain equivalent leakage resistance [R.sub.12] Consequently, the total current through the collector junction can be written as
* IV Infusion Filters--Ventilation and high leakage resistance, for efficient dissipation of air bubbles in the IV solution stream and for effective air evacuation during filter reprimes
R2 is the leakage resistance that represents forgetting.
The leakage resistance of the stator inductive [x.sub.l] value is not normally determined with the tests.
better leakage resistance. superior low temperature performance.