leveling screw

leveling screw

[′lev·ə·liŋ ‚skrü]
(engineering)
An adjusting screw used to bring an instrument into level.
References in periodicals archive ?
Tenders are invited for Leveling Screw With Nut As Per Drawing No.
Limited Tenders are invited for Supply Of Leveling Screw, Hex Head Unc 1, Full Thread As Per Drawing And Spec No.524_Br1415_1 Rev.0 Enclosed Under Third Party Inspection, Price Bid Format Enclosed.
2 mm; Quality according to din en 10131, - per foot at least 2 adjustable floor glides / leveling screws with at least 10 mm height compensation or the like to compensate for uneven floors (for hard and soft floors), - the crossbeam (sheet steel / steel perforated plate or steel) must be durable, Powder-coated (at least 50 my), - foot rest either with plastic cover (black color) or chrome plated, - optional paint in ral color 7035 (gray); Ral 9005 (black); Ral 3003 (red) and ral 5014 (dove blue), - 3-year warranty on the delivered products, - availability of spare parts for at least 10 years, Deliveries of truss benches (incl.
One box includes the mount head, hand controller, battery charger, cables, leveling screws, and tripod-locking knob, all neatly tucked into a foam-fitted carrying case.
You then level the mount on the tripod by twisting the leveling screws as needed to center the built-in bubble level on the base.
The stand column is made from clear anodized aluminum with a steel weldment base.The base has leveling screws and castors for easy setup.
Installed using leveling screws, Corporate Track can be installed on top of any existing flooring, even carpet, with no damage and also comes with a pre-finished, non-slip decking that has the ability to be easily re-leveled.
Once the instrument is mounted on the tripod, the next step is to level the instrument (set the telescope horizontal).The instrument is leveled by turning the four leveling screws in the correct sequence.
Consisting of a telescope with cross-hairs, a spirit level, a horizontal angle scale, and four leveling screws.
There should be leveling screws on the feet and a circular bubble level on the table itself.
Tenders are invited for Granite surface plate, 1000x1000x150mm, with M S stand and leveling screws, required at BEML LIMITED, KGF Complex , H&P Division
With vernier scale and accuracy of 0.01 mm with magnifier for reading scale,Heavy cast iron base with machined vee-top surface and fitted with leveling screws, 10X eye piece 20x eyepiece,