load regulation


Also found in: Wikipedia.

load regulation

[′lōd ‚reg·yə‚lā·shən]
(electricity)
The maximum change in the output voltage or current of a regulated power supply for a specified change in load conditions.
References in periodicals archive ?
The average age of an owner-operator is over 55 years today, and a majority of the small carriers are getting crushed with regulations, increasing truck costs and a general lack of adapting to technological changes that can help them gain an edge in the business," said Drew Jahnke, director of sales at Oversize, an over-dimensional load regulation and costs calculation platform.
And after the axle load regulation, the revenue shortfall will be of Rs 12 to 15 billion per annum.
In the load regulation when the load current changes, PWM mode generates a constant switching frequency with the change of the duty ratio.
Figure 9 shows the general load regulation characteristics of the droop method [23, 24].
At present, relevant researches mainly focus on the establishment of an air-conditioning load model [10], the prediction of air-conditioning load [11], and air-conditioning load participating in peak load regulation and frequency modulation [10, 12].
The use of KES for energy storage and load regulation is an important step in improving the energy efficiency of power supply systems.
Then load regulation test is also simulated, the initial condition is H = 71.5 m and P = 115 MW, with large net mode, and the range of load regulation is 0~100%; the result of simulation is shown in Figure 5.
KEY SPEC: Standard features include efficiency as high as 86 percent, 1,500 VDC input/output isolation, continuous short circuit protection, tight line/ load regulation, and low noise operation.
On another hand, load DC response is shown in Figure 7, where the variations of the load from 100 [mu]A to 100 mA results in a load regulation of 0.06 mV/mA.
In the verification phase of a product, design issues causing SOA problems can include: incorrect load regulation, incorrect transistor selection, gate drive optimization problems, IGBT turn-on issues, or poor thermal design.
The ZXTR1005's high-performance line and load regulation capability also ensures transient voltage drops will not result in latch-up, thereby safeguarding continuous operation of the voltage supply.