The result is a transmission coefficient for the loaded line close to 1 even at the fundamental resonance of the considered particle.
We have thus etched a slot in the ground plane (see the dimensions in Figure 4) to achieve good matching to 50 Q in the symmetrically loaded line.
In this resource on elastohydrodynamic lubrication (EHL), Kudish (Kettering University) presents a method for assessing lightly and heavily loaded line
and point EHL contacts using asymptotic and numerical approaches.
A LOADED LINE may be defined as a transmission line having a distribution of uniformly spaced capacitive loads (4).
One implication of loading concepts is that in various high-speed PCB termination (11) techniques such as series, parallel, Thevenin, etc., the loaded line characteristic impedance (Zo') should be utilized when computing the optimum values for terminators, not the unloaded (Zo).
'One of the characters is a donkey', Yeats told Dorothy Wellesley, and he takes considerable time to develop from a single loaded line
- 'A donkey creel load of Hems eggs' - the vividly theatrical life-size toy donkey which decides Congal's fate after his death.
Carefully modeled switch FETs are used to implement loaded line
22.5 |degrees~ and 45 |degrees~ bits, a switched line 90 |degrees~ bit and a shorted coupled lines dual |pi~ network 180 |degrees~ bit.
And yet, he says simple but loaded lines
such as 'Richard loves Richard, that is, I and I.'
As surrogates for the Republican and Democratic nominees trade verbal jabs and riled crowds shout racially loaded lines
, the Republican Party chairman in hotly contested Virginia shouldn't up the ante with such an outlandish comparison.
The design incorporates a wide variety of techniques using microstrip technology with the combination of switched lines, loaded lines
and PIN diode switches to achieve minimum loss and linear phase over the operating frequency band and monotonic phase.
Also displayed was a Novolas WS (Work Station) unit designed for flexibility in manually loaded lines
. The WS model has quick-change welding heads and optical lenses and permits rapid shifts between different laser welding modes (contour, simultaneous, and masking).
The test circuits include elements found commonly in microwave applications: DC blocks, 50 [ohms] loaded lines
, attenuators and coupled microstrip lines, as shown in Figure 4.