locating hole

locating hole

[′lō‚kād·iŋ ‚hōl]
(mechanical engineering)
A hole used to position the part in relation to a cutting tool or to other parts and gage points.
References in periodicals archive ?
When a cylinder is installed in the cradle on the truck, the cylinder locator pin should enter the locating hole in the cylinder collar.
Tenders are invited for NCTPS I SE MI circle MPM Dn Unit I II and III Providing necessary scaffolding arrangements cutting and lowering the damaged worn out coal pipes fixing the new rolled coal pipes released rectified coal pipes and arresting the coal pipes on either sides of the worn out coal pipe with locating holes and special type sleeve coupling during annual capital overhaul for the year 2016 17
Other features include full ejector pattern, removable center locating ring, and shot-pin locating holes for 90[degrees] and 120[degrees] turns.
If you are absolutely sure that your work is square and you have the drill precisely centered above the hole location, drilling all the way through will give you a guide plate with locating holes in the correct location.
The complexity the sensor addresses includes things like locating holes, edges, radii, and even randomly formed surfaces on material including metal, glass and plastic--and doing the location while the part is in motion, on the assembly line.
The main design challenge, he said, was choosing from among the many options for locating holes.
Step-by-step instructions walk through the process of adding dimensions to a drawing, extruding a sketch into three dimensions, locating holes and counter bores, inserting text, switching to an orthographic view, importing existing solid models into an assembly, and modifying parts in an assembly.
Aluminum component designs have locating holes that required riveting operations.
After locating holes are drilled, the drill operators clean each drum, perform quality inspection of the holes and diameters, and apply a rust preventive before swinging the drums onto waiting pallets.
Sheltech Custom Trays are vacuum formed and can include features such as cavities in almost any size and shape for holding parts, locating holes for robotic arms, engravings, matching covers, and snap or clamshell closures.
These include: ISO style repairable cyclinders with integral air cushions and dowel pin locating holes on the tooling and plate and slide body.
The wafer and lugged split body design includes body locating holes for easier installation and to ensure perfect centring of the valve between flanges.