lock plate


Also found in: Dictionary.
Related to lock plate: Strike plate

lock plate

1. Same as strike plate.
2. Same as box strike plate.
References in periodicals archive ?
The tumbler (#27) and the sear (#32) can now be lifted off the rear face of the lock plate. Make note of their positions for reassembly.
Holding the lock plate in your hand, strike the tumbler screw a few blows with a plastic mallet to break the hammer loose from the tumbler.
You can now lift the compressed mainspring off the lock plate (#3.) Unscrew and remove the three bridle screws (#10), enabling you to lift off the bridle (#6).
Tenders are invited for Kit Of Loco Plate For Zdm3 Loco 3 Items 1 Axle Lock Plate Drg No.4D/12.05-105 Qty Per Kit- 2 Nos.
Tenders are invited for Set Of Lock Plate. Each Set Consisting Of Two Items.
Tenders are invited for Set Of Lock Plate And Catch For Coach Consisting Of 04 Four Items Are As I Plate Lock To Llh S Drg No.Xc-M-268-G,Alt.No.2,Qty-Kit Is Equal To03 Nos.
Lock Plate 3 Pieces-2 Mm, Lock Plate Celam Pelat, Belan-4 Pieces, Screw-10 Pieces, 3 Key-10 Gauge, Brass Cylinder 28 Operationwith Cross Key.Mukbach-14 Gauge, Finish Piece And Pc And Cp.
"Three millimeters is about the limit if you want repeatable, effective welds with no material burn-back," says Mees, "while 8 mm is the thickest section we use." Side crash forces are fed through the rocker panels into the main structure, with support from the extruded aluminum door beam that ties into the main structure through the hinge and lock plates.
Tenders are invited for Different types of mechanical maintenance works of emergency nature like replacement of fluid couplings , Geared couplings , 150mm dia pipes , Bearings of vgf ,bearings of rgrs and fabrication of lock plates , Double scraper plates , Idler frames etc if necessary as and when required for the year 2019-20 in crusher house of mm-iii sub division chp stage-iii drnttps
Different types of mechanical maintenance works of emergency nature like replacement of fluid couplings , Geared couplings , 150mm dia pipes , Bearings for vgf bearings for rgrs and fabrication of lock plates , Double scrapper plates , Idler frames etc if necessray as and when required for the year 2018-19 in crusher house of mm-iii sub division chp stage-iii drnttps
Tenders are invited for Supply of Lock Plates for Flex Speed Carousel.