It must be large enough to fit over a machine screw.
Put a washer onto a machine screw and push it through hole number 1 from the outside of the lid.
* 2 1/2" long 6-32 machine screws with nuts and washers
Three holes must also be drilled in the can, two holes in the sides for the machine screws which are used to attach the rubber strips and one hole in the bottom for the eye hook.
Hollow wall anchors 16 6" x 5/16" hex head machine screws
2 4" x 5/16" hex head machine screws
6 5/16" hex head nuts 8 5/16" washers 16 Construction adhesive 2 tubes 6' shelf standards 12 Shelf clips 30 Johnson 2200-096 96" track * 2 Johnson 2216 single wheel hanger * 6 Johnson 2238 single wheel hanger * 6 Johnson 2135 bypass door guide * 5 * Order these parts online directly from Johnson Hardware at johnsonhardware.com.
Position the door and drive in the machine screws
that act as pivot points for the door.
Contract award notice: Screw-related goods (screws and bolts, machine screws
) as per lists of specification.
through the plastic into the plywood.
Screw the two halves together with the machine screws
Tenders are invited for 24 EA taps, machine screws
, high speed steel, commercial ground thread, no.
Tenders are invited for Machine Screws
Raised Round Head Of Size: 6 X 12 Mm, With Out Nut To Is: 1366/68.
Tenders are invited for S.S.Round Slotted Machine Screws
Ss Grade:304-A2 Full Threaded Size 5/32 Inch X 1/2 Inch As Per Bs 450 Alongwith Ss 304 Hex Nut As Per Bs 1083 Along With Test Certificate.