machine setting

machine setting

[mə′shēn ‚sed·iŋ]
(mechanical engineering)
References in periodicals archive ?
HARAPAN KURNIA indicates the better machine setting ensures better quality and the good support as decisive points for their decision to buy now their 6th BRUCKNER machine.
Machine setting is crucial to getting the best part out of an injection molding machine but it is also crucial in minimizing the energy use of the machine.
From the beginning of the machine setting process, the software uses a systematic, scientifically corroborated and objective approach to optimising the operating point to improve the process quality and cycle time.
'Puppys' are known to call their mums about anything from what washing machine setting to use to whether their partner is right for them and even about the most sensitive work information in a bid to reduce stress.
A 24 hour service line identifies problems, and customer training can be arranged for machine setting, error management and CNC technologies.
* The 1100 x 650 Terex Pegson Premiertrak XA400 jaw crusher, which features a hydraulic adjust system that provides for quick machine setting changes with no drawback rod adjustment.
The book begins with a review of basic concepts and principles, and moves on to tooling, workholdiug, machine setting, speed and feeds, and part programming before concluding with a discussion of advanced techniques.
"You can get the machine setting perfect and use whatever tyres you think are right, but the bumpy state of the surface is going to be the decider," said the London-based Italian.
"The traditional laboratory also offers a cleaner, more stable environment in which to do measurements, compared to the paper machine setting where fluctuations in temperature, humidity and contamination can negatively affect test results."
1), where compound temperature is determined by screw and barrel geometry for a given machine setting. Conventional vacuum extruders do not feature a mixing section, so that homogenous heating of the compound and compound temperature cannot be regulated.
On the one hand, this identifies production problems for further machine setting optimization, while on the other hand it prevents faults in the final product by removing any remaining disturbing defects.
Versus traditional injection-blow, the Pressblower process is unique because it runs lower-priced molds and part wall thickness can be varied by machine setting. FGH: (973) 625-8114 * PTDirect: 664GH