magnet wire


Also found in: Wikipedia.

magnet wire

[′mag·nət ‚wīr]
(electricity)
The insulated copper or aluminum wire used in the coils of all types of electromagnetic machines and devices.
Mentioned in ?
References in periodicals archive ?
The general approach to overcome these issues is to substantially increase the dielectric strength value of the magnet wire used in the electric motor windings.
Limited Tenders are invited for 1)2.39x5.51 mm (bare) ; 2.69/2.89x5.79/6.04 mm(covd.) polyester(amide)(imide) overcoated with polyamideimide, heavey quadruple enamelled; double polyester glass fibre covered bare of heavy film coated copper magnet wire to tm15557 rev.
2 June 2017 - The magnet wire division of Indiana, US-based Essex Group, Inc., a company of wire and cable manufacturer Superior Essex, has acquired the Malaysia-based magnet wire facility previously operated by LS Cable and System, to expand footprint into Southeast Asia, the company said.
The magnet wire (High-Voltage Wire: HVW) composed of polyetheretherketone (PEEK) resin .
WHAT YOU NEED: * 2-3' long 1x2 boards * wood glue * electrical tape * 600' to 630' (about 1/2 lb.) of #26 enameled copper magnet wire * boom box with 3.5mm AUX or MIC input * 1-3.5mm, or 1/8" male, mono patch cable, 6' to 10' long ** ** Note about 3.5mm connectors: Most 3.5mm connectors are stereo, which means they lave three wires coming from them.
A representative of Taya says sales of high-pressure electrical cable in 2012 remains the same as 2011, with order visibility of fiber-optic cable extending to the end of this year, and lower-than-expected orders of magnet wire and low-pressure electrical cable due to the gloomy economic climate.
The rule applies to all metal coatings operations except those performed on aerospace assembly, magnet wire, marine craft, motor vehicle, metal container, and coil coating operations.
High-temperature ceramic cores and magnet wire provide desirable temperature stability and mechanical ruggedness.
They are a leading manufacturer of magnet wire, fabricated insulation products, and copper and fiber optic communications wire and cable.
Standards test methods for resistivity, determination of cross-sectional area of stranded conductors, and stiffness of wires for magnet wire fabrication are also provided.
An ISR (inverter spike resistant) magnet wire is included to resist transient voltage spikes, high frequencies and short rise-time pulses from inverters.