cut

(redirected from making the cut)
Also found in: Dictionary, Thesaurus, Medical, Legal, Idioms.

cut

1. Botany incised or divided
2. Veterinary science gelded or castrated
3. Economics a decrease in government finance in a particular department or area, usually leading to a reduction of services, staff numbers, etc.
4. short for power cut
5. Chiefly US and Canadian a quantity of timber cut during a specific time or operation
6. Sport the spin of a cut ball
7. Cricket a stroke made with the bat in a roughly horizontal position
8. Films an immediate transition from one shot to the next, brought about by splicing the two shots together
9. Chem a fraction obtained in distillation, as in oil refining
10. the metal removed in a single pass of a machine tool
11. 
a. the shape of the teeth of a file
b. their coarseness or fineness
12. Brit a stretch of water, esp a canal
13. make the cut Golf to better or equal the required score after two rounds in a strokeplay tournament, thus avoiding elimination from the final two rounds
14. miss the cut Golf to achieve a greater score after the first two rounds of a strokeplay tournament than that required to play in the remaining two rounds

Cut

 

a relief printing plate used for reproducing illustrations. Depending on the type of original being reproduced, either a linecut or halftone is made. Linecuts are made from an original consisting of lines, strokes, and solid backgrounds of uniform density (pen-and-ink drawings, engraved prints, sketches); halftones are made from an image with varying densities (photographs, watercolors, or oil paintings).

Cuts are made with wood, linoleum, zinc, brass, copper, or plastic. In making zinc cuts, which are the most widely used, the original is first photographed; using photomechanical methods, it is then transferred onto a zinc plate with a light-sensitive coating, after which the areas between the surfaces to be printed are deepened by chemical or electrochemical etching. Copper cuts are made by hand engraving or etching in a solution of ferric chloride. There is also a quick method, known as single-process etching, for making magnesium and zinc cuts with etching machines. Cuts are also made on electroengraving machines. One cut will print 40,000–50,000 copies.

REFERENCES

Geodakov, A. I. Tsinkografiia. Moscow, 1962.
Geodakov, A. I. Proizvodstvo klishe. Moscow, 1972.

cut

[kət]
(biochemistry)
A double-strand incision in a duplex deoxyribonucleic acid molecule.
(chemical engineering)
A fraction obtained by a separation process.
(crystallography)
A section of a crystal having two parallel major surfaces; cuts are specified by their orientation with respect to the axes of the natural crystal, such as X cut, Y cut, BT cut, and AT cut.
(graphic arts)
A photoengraving used in letterpress printing.
(lapidary)
The style in which a gem is cut, such as brilliant cut, single cut, or rose cut.
(mathematics)
A subset of a given set whose removal from the original set leaves a set that is not connected.
(metallurgy)
(mining engineering)
To intersect a vein or a working.
To excavate coal.
To shear one side of an entry or a crosscut by digging out the coal from floor to roof with a pick.
(cell and molecular biology)
A double-strand incision in a duplex deoxyribonucleic acid molecule.
(nucleonics)
The fraction that is removed as product or advanced to the next separative element in an isotope separation process.
(textiles)
The number of needles per inch in the cylinder or needle bed in a knitting frame.

cut

1. Excavated material.
2. The void resulting from the excavation of material.
3. The depth to which material is to be excavated to bring the surface to a predetermined grade.
4. In the theater, a long slot across the stage floor for the introduction or removal of scenery.

cut

i. To switch off an aircraft engine.
ii. To cut the gun. To close the throttle of an engine.
iii. In air navigation, the intersection of two lines of position; this is the smaller angle between these two lines.

CUT

cut

(1) Remove. Delete. See cut and paste.

(2) In a video or movie, a sharp transition from one scene to another.

(3) A Unix command that extracts data from a file based on its location within the file.
References in periodicals archive ?
Punters looking for an even safer bet should consider Bet365's 8-15 about Bo Van Pelt making the cut. He is one of the most consistent ball-strikers on the US Tour and an unfashionable name who often goes off at value prices.
Just making the cut was my own wee tournament and I'm going out to enjoy it."
Stunning actress Andrea Irvine is the hottest property in town - but right now the star of Making The Cut has no idea where her next pay packet is coming from.
Brooks was making the cut here for only the second time in 10 attempts last year and has a game totally unsuited to the place; Ballesteros was once a great champion here but has missed his last three Augusta cuts and will be praying that reacquaintance with the scene of two of his greatest triumphs will spur him to a respectable showing.
RTE are pinning all their hopes on a new pounds 1 million cop drama Making The Cut.
But Coral believe the teenager has no chance of staging a repeat and offer 9-2 (Hills go 7-2) about him making the cut. He has made only one cut since turning professional following last year's effort, and it took him 21 attempts to do so.
If the central bank makes the rate cuts, it would be the first time since March 2001 that the bank would be making the cuts.
But the journalists simply quoted complaints from OPEC members who were making the cuts about others who weren't and used figures provided by people in the industry.