The bet result so far was recently obtained by Guedj and Zeriahi that were able to define the maximal flow
for any initial current with zero Lelong number.
The International Prostate Symptom Index (IPSS) and quality of life (QoL), maximal flow
rate (Qmax) and post-void residual (PVR) were examined pre-operatively and postoperatively during follow-up.
the maximal flow
rate (Qmax) measured using uroflowmetry and the prostate specific antigen (PSA) values were recorded.
According to maximal flow
and minimal cut of network information flow, the maximal value W of flow that from source S to information sink T equals to the capacity of its minimal cut.
Dysanapsis in normal lungs assessed by the relationship between maximal flow
, static recoil, and vital capacity.
It featured the maximal flow
of 770 mm, the flow time into the diameter of 500 mm--6 s and the air content--4.
In order to make a valid comparison of tidal flow and maximal flow
, the tidal breathing loop must be plotted at the correct point in the lung volume history.
For this study, multiple lung function tests were performed and significant changes were noted in four measurements: the FVC, or forced vital capacity, which reflects the volume of air that can be blown out after fully inhaling; the FEV1, or forced expiratory volume in 1 second, which is the volume of air that can forcibly be blown out in one second, after fully inhaling; the FEF, or forced expiratory flow, which reflects the flow of air coming out of the lungs during the middle portion of a forced exhalation; and the PEF, or peak expiratory flow, which is the maximal flow
achieved when air is forcibly exhaled immediately after being inhaled.
velocity in the middle cerebral artery is now accepted as the best non-invasive method to detect fetal anaemia and has proved extremely useful to monitor pregnancies with red cell iso-immunisation, non-immune hydrops or fetal infection.
the proportion of processing entities should be optimized to get the maximal flow
of nectar i.
PS technique has some disadvantages like its maximal flow
rate is low and distal perfusion pressure is lower than PS techniques (6, 7).
The objectives of the MOLP design models are to achieve specified performance parameters at either minimal cost/delay/distance (using MOLP) or at maximal flow
and reliability using both MOLP and DP.