mechanical connection

mechanical connection

The joining of two or more elements by mechanical fasteners such as bolts, rivets, or screws (but not by non-mechanical means, such as by adhesives).
References in periodicals archive ?
Quick Pipeline Connectivity: NOV's Zap-Lok system provides mechanical connection systems (4-5 times faster construction than the conventional pipeline systems), coupled with specialised Tuboscope internal plastic coatings (sour service optional) that provide an efficient and cost-effective pipeline installation, designed to maximise the design life of assets.
8226; L-terminations reduce equivalent series inductance (ESL) by 33% while improving the electrical and mechanical connection to the PCB
The jacquard machine in case of the VSi32 is driven by a servomotor eliminating the need for a mechanical connection between the weaving machine and the jacquard.
SCV Series barbed check valves were developed to provide a reliable mechanical connection and simplify tubing assemblies that often require multiple parts needed for in-line check valves.
A varied selection of structural designs, electrical signals and mechanical connection formats guarantees that these intrinsically safe pressure transmitters can be used for an extensive range of applications.
Typical Methods Used for the Mechanical Connection of the Inner Conductor
The series configuration cuts the mechanical connection between the diesel engine and the wheels.
The close attention was traditionally paid to multi-motor electric drives mechanical connection between which is exercised out through executive body of the working machine.
This is because, despite no direct driven mechanical connection, an electromagnetic load is being placed on the alternator generator.
Previous studies by the team and other researchers have shown that grafted OPCs survive after grafting into an injured spinal cord and increase movement recovery, but the mechanical connection to remyelination had only been theorized.
Upon completion of the mechanical connection between the mechanical model and control system, it obtained the characteristics diagrams which are evaluating the dynamic behavior of the deposition system used.
It would not have any mechanical connection to the prop, so it wouldn't need the heavy gearbox, flywheel, and torsional vibration damper.

Full browser ?