medium carbon steel


Also found in: Dictionary, Thesaurus.

medium carbon steel

[′mē·dē·əm ¦kär·bən ‚stēl]
(metallurgy)
Steel containing 0.15-0.30% carbon.
References in periodicals archive ?
"Optimization of Surface Roughness in End Milling of Medium Carbon Steel by coupled Statistical Approach with Genetic Algorithm, The First International Conference on Interdisciplinary Research and Development.
For comparison, an uncoated medium carbon steel specimen was tested as well.
For wear surface microgeometric parameters and wear relation evaluation was used low carbon boron micro alloyed steel Hardox 400 (further H400, SSAB Technology AB), medium carbon steel 45 (GOST 1050--88), carboniferous (spring) steel 65G (GOST 14959--79).
Among the topics are the thermal conductivity design and evaluation of zirconium phosphate bonded silicon nitride porous ceramics, carbon nanomaterials for drug delivery, continuous dynamic recrystallization during the warm deformation of tempered lath martensite in a medium carbon steel, a comprehensive approach for constructing new material for electronic multipliers, and a computer simulation model for composite materials reinforced by multi-sized spherical particles.
To avoid contamination from unwanted elements, a wash heat of medium carbon steel always is employed when switching from melting iron to stainless steel or when switching from melting stainless steel to ductile iron.
Made With Medium Carbon Steel Bs970/En-8 , Pumps Body Also Made From Medium Carbon Steel Bs970/En8
Tenders are invited for Bolt Medium Carbon Steel Tempered And Quenched Cadmium Plated Hex Head Size 3/4 - 10Tpi Unc -2 Long Special Alco Specification No: Cat No 6717978P1
No 2 Specification : Medium Carbon Steel Bar To Is: 1570-1961 Gr.
Tenders are invited for Screw, cap, hex head, quenched & tempered, top chamfered, full washer faced, medium carbon steel, zinc-plated, sae j-429 grade-5 or astm a-449 type-1, coarse unc 2a threads.
Tenders are invited for Step Block For Ultrasonic Flaw Detector 10 Steps From 1Mm To 10Mm Made Of Low Carbon Steel Or Medium Carbon Steel With Calibration Certificate Traceable To Nabl / National Standard.

Full browser ?