mixing cycle

mixing cycle

In mixing concrete in a batch mixer, the time taken for a complete cycle, i.e., the elapsed time between successive discharges of the mixer.
References in periodicals archive ?
At the end of the mixing cycle on the blending mills, the batch is automatically conveyed to the sheeting mill.
A 23" clearance from the valve outlet to the floor allows operators to position a bucket under the vessel to catch finished product after the mixing cycle.
* Vacuum capability allows users to remove air from the batch before starting the agitators or during the mixing cycle
- Automatic control of molding sand parameters, including minimum humidity control, compaction and compression strength, while additionally scored will be more advanced measuring systems guarantee an additional opportunity to study parameters such weight as bentonite total, bentonite, active and ensuring the possibility of weight control and correction of its parameters during the mixing cycle.
At any stage of the mixing cycle, operators can fme-tune the observed flow turbulence and shear because the stirrers and dispersers are independently driven by two different motors.
After the mixing cycle, the vessel is rolled over to the discharge system.
The Professional Martini Maker produces a martini in one minute, although users have the option to stop the product at any time during the mixing cycle.
Equations 4 through 8 together describe the bulk viscosity profile in the second zone of a typical mixing cycle. Since the measured variable during mixing is usually either torque or power, these equations can be rewritten to calculate either dimensionless torque or dimensionless power.
The control of batch bread manufacture is ensured by mixing driven by time and speed (controlled by a gear motor with frequency regulator); mixing the energy input into the dough (Wh/kg); pressurised air injection control; vacuum control at the end of the mixing cycle; and optimum cooling of the mixing bowl (using glycol water).
At the end of the mixing cycle, the complete mixed volume (batch) of blended sand is discharged from the mixer at one time.
Shorr notes that conventional "cold" filler addition to the mixing cycle has several disadvantages.
The total bound rubber of compound 3 reaches a similar value as compound 1 with long mixing cycle. This suggests that PA2 supports the silanization reaction.