msec


Also found in: Dictionary, Thesaurus, Medical, Acronyms, Wikipedia.

msec

(mechanics)

Msec

(mechanics)
References in periodicals archive ?
The SOA between the target and the probe was set at 0 or 2000 msec (in the 0 msec condition the target and probe appeared and disappeared simultaneously).
The indications for CRT had been as follows: Heart failure (LVEF [less than or equal to] 35%) due to ischemic or non-ischemic cardiomyopathy with NYHA functional class III-IV, sinus rhythm and QRS duration [greater than or equal to] 120 msec.
As opposed to the usual practice of reducing TE to improve the signal in T2W fat-suppressed series, standard or even prolonged TEs (100-150 msec) are required to better demonstrate fluid-filled structures in highfluid-content backgrounds such as the salivary glands.
By adopting this algorithm, delay is minimized to 10 msec in ultra low delay mode and 60 msec in low delay mode(3).
The figures are labeled with sec or msec for the barrier reveal delay components, hereafter referred to as "delay components" or "components," depending upon available space on an axis.
Agonistic signals had a mean dominant frequency of 89.5 [+ or -] 6.6 Hz (n = 8), a mean total duration of call of 1,569.6 [+ or -] 2,663.7 msec (n = 8).
The delay was most pronounced in the autistic children with language impairment, averaging 40 msec slower than typically developing children.
Our institutional values indicating retrocochlear pathology relative to these indices are [greater than or equal to] 4.4 msec for the I-V interval, [greater than or equal to] 0.4 msec for the ILD, and [greater than or equal to] 6.2 msec for the absolute latency of V.
A TE of 2.2 msec is advisable at 1.5T, and 4.4 msec is advisable at 1.0T.
Quality management in the client software allows it to maintain calls when the packet loss is as high as 50%, handle up to 400 ms of jitter and 250 msec of latency, and automatically reconnect calls that are temporarily interrupted.
In test operations, PLC on a Chip can scan through 500 rungs of ladder logic in 2.5 msec. Not surprisingly, scan times are longer in control programs with a lot of math in the function blocks.
The AG-IS Series features test speeds ranging from 0.00005 to 1,000 mm/min., with ultra high speed sampling selectable from 1.25 msec to 5 msec.