bus network

(redirected from network bus)

bus network

[′bəs ′net‚wərk]
(communications)
A communications network whose components are joined together by a single cable.

bus network

(networking)
A network in which all nodes are connected to a single wire (the bus). The two endpoints will have a terminator. Bus networks typically use CSMA/CD techniques to determine which node transmits data on the wire at any given time.

Examples are Ethernet 10Base2 and 10Base5 networks.

See also star network, ring network.

bus network

A network topology that uses a common pathway between all devices. Ethernet 10Base5 and 10Base2 are examples of bus networks. See bus and Ethernet.


The Three Network Configurations
In a network, the bus is one of three primary topologies.
References in periodicals archive ?
the aim is to establish a road plan, which allows the ten-t to achieve the requirements of the core network bus into the city center.
Information flows to an electronic control unit (ECU) from each device via the network bus, eliminating the need for independent connections between the devices and the ECU
Programmer, Eric Evenchick, has developed a device called CANtact that acts as an interface between a computer's USB port and the Controller Area Network bus that serves as the gateway to a vehicle's electronic systems, according to a report by Wired.
A CompactRIO is at the heart of the control system, controlling each power delivery component via a controller area network bus interface and acquiring analogue sensor signals such as accelerator and brake pedal position and fuel flow rate.
An improved NHS Network bus service running between Rugby's St Cross and Coventry's University Hospital has been introduced after people in Rugby raised concerns about the timing of the bus service with the NHS Coventry and Rugby Clinical Commissioning Group at patient forums.
It uses an additional Controller Area Network bus interface exchange all relevant data with the hybrid component, power electronics, and battery.
The ST butterfly valves are also available as a manual valve with limit switches for those applications that do not require automation but do require feedback to a PLC or network bus system.
Two communication nodes and one data logging node were used for each test, and a successful message transmission was determined by noting whether messages were successfully passed without error from one end of the network bus to the other.
These resonators, suitable for Controller Area Network (CAN) bus or any automotive network bus that requires tight tolerance, are a smaller option when compared to their counterparts, quartz crystal resonators.
Network bus and bus/rail tickets are available to make travelling easier.
This highly integrated device supports the transmission and reception of data on a twisted pair network bus and is compliant with the KNX standard for home and building automation.