500 Grams Display: Large Size Lcd Display Fluorescent Green Measuring Range: Hld 170-960 , Hrc 19-651 Hba 80-976 H V 30-100 Hs 59-85 Hra 13-100 Shore - A 10-100 Shore - D 10-100 Hardness Scale: Direct Digital Display Of Hardness Leeb, Brinell, Rockwell A, B, C, Vicker, Shore Material Should Be Measure: Steel And Cast Iron, Cold Work Tool Steel, Stainless Steel, Gray Cast Iron, Nodular Cast Iron
, Cast Alluminium Alloys, Brass Copper - Zinc Alloys , Bronze Copper - Alluminium Alloys / Copper - Tin Alloys And Rubber Base Items Working Voltage: 3 Volt 2 Aa Alkaline Chargeable Batteries With Charger Testing Angle / Impact Direction: Up, Down, Horizontal.
Plus, a 500-hour service interval aided by a purpose-built marine design featuring a long stroke, water cooled exhaust manifold, special coated liner and nodular cast iron
piston with coated piston rings assure minimum downtime to keep vessels on the water and out of the shop.
Fracture analysis of a camshaft made from nodular cast iron
At the new foundry nodular cast iron
, alloy and carbon steels and copper casting (bronze) valves and other components are being produced.
The topics include performance and blending techniques of cord fibers, microstructures and mechanical properties of troostite nodular cast iron
by heat treatment, the tensile strength of neat and coated woven fabrics, research on airborne blue-green laser anti-submarine technology, an autonomic indoor fire extinguishing system, preparing and characterizing chitosan-casein phosphopeptides biocomposite coating on a medical titanium alloy, key-point of construction techniques for concrete pipe-jacking tunnel, and wind environment investigation research on the site of a cross-sea cable-stayed bridge.
Influence of graphite nodules on fatigue limit of nodular cast iron
HONG KONG, June 24 /PRNewswire-Asia/ -- The water supply and drainage industry giant, the No 2 nodular cast iron
supplier worldwide, XinXing Ductile Iron Pipes Co.
The GMSCIF produces two types of cast iron: Mg treated nodular cast iron
and high Ni alloyed cast iron.
GC3210 is for high-speed machining in nodular cast iron
28 for nodular cast iron
as reported by Dong et al.
Pouring devices with induction heaters for dosed quantities of gray, malleable and nodular cast iron
and copper alloys also are available.
The main technical machining required of inner cylinder surface of cylinder shirts by pearlite lamellar or nodular cast iron
[Schrader,2000] are: higher tolerances for fit diameter, roundness of (0.