octyl alcohol


Also found in: Dictionary.

octyl alcohol

[′äkt·əl ′al·kə‚hȯl]
(organic chemistry)
References in periodicals archive ?
Therefore the formation of other impurities such as [Al.sub.2][O.sub.3] can be suppressed when NiO/Ni[Al.sub.2][O.sub.4] powder was synthesized by solution combustion method using octyl alcohol and lauric acid, which is consistent with Sutka's work.
The crystallite size of the powder produced by octyl alcohol and lauric acid ranged between 24 nm-95 nm and 15 nm-68 nm respectively.
The crystallite size of the powder produced by octyl alcohol and lauric acid ranged between 40 nm-150 nm and 40 nm-75 nm respectively.
NiO/Ni[Al.sub.2][O.sub.4] powders with submicron particles can be obtained using either octyl alcohol and lauric acid and calcined at 1300[degrees]C for 2 hours but the smallest particle size can be produced using lauric acid.
As shown in figure 12 and figure 13 carbon content in the final product can be controlled to a minimal when NiO/Ni[Al.sub.2][O.sub.4] powder was synthesized by solution combustion method using octyl alcohol and lauric acid and calcined at 1300[degrees]C for 2 hours.
This research focuses on the synthesis of nanostructured NiO/Ni[Al.sub.2][O.sub.4] powder by solution combustion method using octyl alcohol and lauric acid.
* Nanostructured NiO/Ni[Al.sub.2][O.sub.4] powder was successfully produced by solution combustion synthesis method using octyl alcohol and lauric acid as fuel.
* NiO/Ni[Al.sub.2][O.sub.4] powder produced using octyl alcohol and lauric acid under the optimum parameters possesses the following characteristics; high crystallinity, no impurities, no residual carbon, submicron particles with equiaxed morphology.