- in operating mode, emergency pump or included in the normal operating cycle
. this may lead to a modification of the transformers which will have to be taken into account in the study and be the subject of a proposal for operation.
During the first quarter of 2018, ADWYA contracted a management loan of 11.4 MD which was used to finance the operating cycle
in general, the length of a typical, for such companies, operating cycle
is shorter than the payment deferral period.
In wind speeds, one year is commonly used as a block size, while in engineering vehicles one operating cycle
may reasonably be set as a block size.
The power firm has been extensively working on extending the operating hours of its deployed gensets in various off-grid areas - at least to 12 hours if the 24-hour operating cycle
cannot be achieved yet in most.
The credit period for import of non-capital goods can be up to a year from the date of shipment or up to the operating cycle
, whichever is lower.
The material is loaded into the catalyst bed with the catalyst where it undergoes oxidation and reduction during the operating cycle
, producing heat and driving the dehydrogenation reaction.
Therefore, the perception of investments in OWC is moved from traditional balance sheet to cash flows workshop, particularly NPV is applied to operating cash flows as generated by operating cycle
. NPV may be appropriate criterion for decision making, thus it is consistent with wealth maximization criterion, occurs efficient while evaluating investments in OWC over the entire planning horizon and captures the integrative nature of the working capital management.
In August 2013, Entergy announced that the Vermont Yankee would not be refueled and would cease operations at the end of its current operating cycle
in late 2014.
However, the truth is that they are a keystone in the daily operating cycle
of most industrial areas.
Its automatic package transfer and the storage of up to two full packages and up to four empty tubes guarantee a reliable operating cycle
The target of this problem is to find the best (un)loading sequence for each bay with minimum operating cycles
. To achieve better crane processing efficiency, double cycling is introduced, which permits a quay crane to perform the unloading and loading in one operating cycle