The CSP is one of the highly particulate composite
materials, always with particle volume fraction between 70% and 80%, or even higher .
 machining of Aluminium-silicon carbide particulate composite
Formed from particulate composite
powders (PComP) containing both ceramics and metals (cermet), the coatings are up to 70% lighter than commercially available tungsten carbide coatings, and up to 40% lighter than electrolytic hard chrome coatings (EHC), due to the use of light and low-cost hard particle-based reinforcements.
material consisting of unsaturated polyester resin (UP) and alumina trihydrate (ATH) shows good mechanical and physical properties.
It is expected that the particulate composite
to show lower mechanical properties but higher dimensional stability.
It was observed that the imprint patterns on the particulate composite
(COEX) could be identified according to effectiveness in impact energy dissipation.
The researchers had spent much time on modelling the properties of a particulate composite
on the basis of its components' properties and many solutions were purposed (Torquato et al.
Beckermann, "Modeling of solidification of Metal matrix particulate composite
with convection", vol 28B, Dec1997, 1165-1183.
Figure 4 shows the flexural strength of wood apple shell particulate composite
at different filler loading.
Abstract: The main objective of this paper is the numerical investigation of fracture behaviour in polymeric particulate composite
with rigid particles.
Ray, "Fabrication and properties of compocast aluminium-alumina particulate composite
," Indian Journal of Technology, vol.
There are many studies regarding the influence of certain fillers on the properties of a particulate composite
, regarding the influence of the reinforcement on the properties of a fibrous composite etc but generally these studies refer to a class of properties like thermal, or electrical, or electromagnetic.